tegunulgener 84 Report post Posted April 3, 2016 Question: have you been stopped by police for the rear lights? I'm thinking to buy smoked for mine but I don't know about legality Sent from my HTC One M9 using Tapatalk Share this post Link to post Share on other sites
adamj29 133 Report post Posted April 4, 2016 15 hours ago, tegunulgener said: Question: have you been stopped by police for the rear lights? I'm thinking to buy smoked for mine but I don't know about legality Sent from my HTC One M9 using Tapatalk The rear lights are buddy club, they aren't actually smoked mate. No I haven't been pulled over for any of the mods. They all conform to the rules and regs so I shouldn't be fingers crossed. The Valenti smoked are sold as 'not for road use' but there are many members on here that are running them, and have no problem what so ever. 1 Keethos reacted to this Share this post Link to post Share on other sites
adamj29 133 Report post Posted April 4, 2016 Took her to Cars and Coffee Liverpool on Sunday, what a day. A well organised event, and some fantastic cars there, so here are a few pictures I've pinched off the facebook page taken by other people (I hope they don't mind me using them): I had to lift the rear suspension as the wheels were slightly catching on the newly installed splash guard. Needless to say I am incredibly happy with the end result. Nigel has done a cracking job with the arches, which fit perfectly and Lee from Autokraft has done a spot on job with the installation of the kit! The wheels are extreme, I think this is the perfect to describe them. Rich from Demon Tweeks has managed to get the 10.5" Wide ET46 rears to fit, using -5 deg of camber. For all those people who say it isn't practical I know, but in the flesh it looks stunning, and lets be honest it isn't a practical car. However I did fit the baby seat in the back yesterday and we went out for a family journey in it. A lot of modifying was required to get the fronts to fit, not modifying Nigels arches but the actual car arch as the wheels were too wide. On full lock the wheels only just miss the back of the front headlight unit by a few mm. Some welding and reinforcing was required, but whey they finally fit. Anyway more photos soon. Hope you like. 11 SL03JOE, Ztox, MangoNo5 and 8 others reacted to this Share this post Link to post Share on other sites
adamj29 133 Report post Posted April 11, 2016 Had a productive Sunday installing my new Whiteline Strut brace from Tuning Developments. Easy to fit, and very light. It compliments the engine bay very well I do need to give the engine bay a good clean prior to Japfest, anyone recommend a good product for this? 1 Keethos reacted to this Share this post Link to post Share on other sites
Panigale 6 Report post Posted April 15, 2016 On 11 April 2016 at 10:10 AM, adamj29 said: Had a productive Sunday installing my new Whiteline Strut brace from Tuning Developments. Easy to fit, and very light. It compliments the engine bay very well I do need to give the engine bay a good clean prior to Japfest, anyone recommend a good product for this? Awesome car bud. Nice one. 1 adamj29 reacted to this Share this post Link to post Share on other sites
adamj29 133 Report post Posted August 1, 2016 Been a while since I've done an update. Not a lot has happened as such with the build. A few decals have been applied for extra bhp, and I've been messing around with the suspension set up. She's also been featured in this months Banzai magazine. As I've been attending a number of car shows, I seem to be continually altering the ride height. Low for the show and then raise it up for daily use. As much as I love my coilovers, I am rather tempted by the ease of air suspension. This would make it would so much easier, as most of you know the car isn't set up for the track, I seem to be enjoying the show scene at the moment. Although after speaking to a representative of Air Lift Performance at FittedUK last weekend, It's very interesting to see how far their management systems have come over the past few years. Food for thought. Here are a few pictures of the last few shows and a few from Banzai: 3 Deacon, Keethos and GT86-Ian reacted to this Share this post Link to post Share on other sites
Paul 442 Report post Posted August 1, 2016 Which front plate holder did you use Adam? Share this post Link to post Share on other sites
adamj29 133 Report post Posted August 1, 2016 6 minutes ago, CanaryWundaboy said: Which front plate holder did you use Adam? I went for the Perrin plate holder, from Tarmac Sportz Share this post Link to post Share on other sites
DaveJenks95 3 Report post Posted November 5, 2016 On 22/02/2016 at 7:29 AM, adamj29 said: Stripped the interior panels this weekend, ready for the hydrographics (Gold carbon weave). Fairly straight forward job, a philips and flat head did the job. The biggest pain was the two silver pieces of trim either side of the air con controls. to remove then you need to remove the whole centre console. This morning I dropped the car off at the bodywork garage, for the wide body kit to fitted. As most of you know it's not an easy kit to fit. Cutting, welding, preparing the panels etc is required prior to fitting. The car will be in there for 2 -3 weeks, Let the transformation begin... Further updates soon... Like the Nardi steering wheel- Did you have to sacrifice the cruise control stalk for it? Share this post Link to post Share on other sites
adamj29 133 Report post Posted November 5, 2016 26 minutes ago, DaveJenks95 said: Like the Nardi steering wheel- Did you have to sacrifice the cruise control stalk for it? I did indeed. Makes it a pain to change the map on the car,but love the feel of the nardi steering wheel. definitely recommend it. Share this post Link to post Share on other sites
DaveJenks95 3 Report post Posted November 5, 2016 Just now, adamj29 said: I did indeed. Makes it a pain to change the map on the car,but love the feel of the nardi steering wheel. definitely recommend it. Yeah it looks sick. Is there a way round changing the maps? Or does it require a laptop being plugged in etc? Also, which boss kit did you use for fitment? Share this post Link to post Share on other sites
Lauren 2259 Report post Posted November 5, 2016 Stan on his sprint car had his stalk mounted sticking up out of the centre console, so he could change maps. It wasn't pretty though. Share this post Link to post Share on other sites
smudge 1020 Report post Posted November 5, 2016 2 hours ago, Lauren said: Stan on his sprint car had his stalk mounted sticking up out of the centre console, so he could change maps. It wasn't pretty though. Neither is Adam's car 1 adamj29 reacted to this Share this post Link to post Share on other sites
adamj29 133 Report post Posted November 5, 2016 2 minutes ago, smudge said: Neither is Adam's car That was a good one, I'll give you that 😂 I used the HKB boss kit. Really easy to fit to be fair. Yeah Lauren, you can get the cruise control to fit, just takes a bit of DIY. It requires a remap, I had mine done at Fensport when having the turbo fitted. I have to now push the accelerator to the floor and press the heated windscreen button to change maps. I feel like James Bond everytime. 😉 1 Lauren reacted to this Share this post Link to post Share on other sites
Kodename47 446 Report post Posted November 6, 2016 Cruise control isn't the Only way to change maps, it's just the easiest. Share this post Link to post Share on other sites