Lucas

Wait for black Friday then ☺️

Wait for black Friday then ☺️

I swapped all my trims out for black ones, made a gearstick boot and put in a few stickers. I've got a billetworkz shift knob coming soon and i might try and make a handbrake boot 

I only just discovered this thread! It's amazing. I loved the show.
Many times I was thinking about finding some goods touge courses. Lake district. wales & scotland's  roads were the best I've seen so far, but everything is way too far from west midlands..  

Hey guys got to mention excellent service on the Cosworth Air Filter👍

Get that rare HKS legamax with 10% off
https://www.part-box.com/32018-at040-hks-legamax-premium-exhaust-toyota-gt86-subaru-brz?search=Hks gt86&description=true
 

So do Mclaren. Instead they used hydraulic roll bars to control roll stiffness in fractions of a second, while springing the car nice and lightly for good road manners. 

I'll likely get massively flamed for saying this but I dont think the active part of the EDFC is worth it anyway. They are only bog standard stepper motors that have a very slow response time . As you turn into a corner the weight transfer will already have happened by the time it firms up the damping. 

Cusco knows why not to bother with that  

Even I am kinda tempted now......but won't I need a beefier clutch?
 
I suppose I could buy the kit and just leave it in the corner until I sort out clutch and brakes and zorst as well....hmmm costs are mounting...and then there's the increased insurance premium....hmmm - a few days left to decide....

Woke up this morning to a bit of sunshine so treated the car to a quick clean, went inside to watch the F1 and then it tanked it down, naturally . Anyway, the rain buggered off so went for a quick drive and a 5 minute photoshoot before the sun went down:
GT86_16_09_nimz-4
GT86_16_09_nimz-3
GT86_16_09_nimz-6
GT86_16_09_nimz-2
GT86_16_09_nimz
Not sure what the next step is, I need a bit more noise so will probably save for a manifold and remap at Tuning Developments if I can stop myself from buying an exhaust first 
 

I could do with  one to be honest! 

https://www.part-box.com/965737a-cusco-baffle-plate-toyota-gt86-fa20
https://www.part-box.com/20048833-cosworth-sump-baffle-plate-toyota-gt86-subaru-brz
https://www.part-box.com/bmzn6-eobp1-bluemoon-performance-baffle-plate-toyota-gt86-subaru-brz

https://www.part-box.com/965737a-cusco-baffle-plate-toyota-gt86-fa20
https://www.part-box.com/20048833-cosworth-sump-baffle-plate-toyota-gt86-subaru-brz
https://www.part-box.com/bmzn6-eobp1-bluemoon-performance-baffle-plate-toyota-gt86-subaru-brz

I'm a sucker for chavvy carbon. I can't help it 🤣

I was thinking about wiring them up to the courtesy light as well, but I like having them on at night when I'm driving. It's more lively in the car imo. I've changed the courtesy light to a white led as well.. and number plate lights.
Hmm, that's the problem, I can't justify £150 for a carbon interior piece.. it won't save a lot of weight 

TRD Engine start/stop button and a smaller 350mm steering wheel. Must admit, not really one for bling. 

Same, thanks @Lucas@PartBox. Even sent me a black rubber cap for my coilovers as 1 of mine disappeared in transit; also Thanks to Tein for agreeing to send it. Now my OCD will be under control... as will my body roll. 

Heated seat switches surround.

Just wanted to say cheers to @Lucas@PartBox for sorting me out with new discs, pads, bolts and a cosworth Sump Baffle. Great service, even sent me picture of the parts before I ordered.

I really want footwell lights at are tied in to the dimmer so they go off when the door's closed.
I've changed every bulb for LEDs, added a carbon seat switch cover, and carbon kick plates. Gear knob's hopefully on the way along with carbon window switch covers, and I keep eyeing up a carbon dash panel...

This is what they look like on an 86. 

This is what they look like on an 86. 

http://coordsport.com/wp-content/uploads/2017/09/HKS-SUPER-COOLANT_Product-Info-1.pdf (same as the link posted above)
 

Absolutely true, even as we speak UEL equiped motors are failing right across the land and not just here in England but in Staffordshire too. The end is neigh, save yourselves... EL for the win 😘