Mark@Abbey M/S 235 Report post Posted March 13, 2015 Tomei unequal header and PTuning header for development on the Abbey Motorsport in house Dynapack! Will put these up agaisnt the HKS header already on our Demo GT86. Share this post Link to post Share on other sites
smudge 1020 Report post Posted March 13, 2015 Interested in the Tomei UEL as discussed the other day Mark Keep me posted Share this post Link to post Share on other sites
LFA 68 Report post Posted March 13, 2015 Burble and whine; Abbey is a full service joint 1 Special K reacted to this Share this post Link to post Share on other sites
Mark-in-Stoke 488 Report post Posted March 13, 2015 Will be watching this thread with great interest. Share this post Link to post Share on other sites
rob275 1817 Report post Posted March 14, 2015 Keep me posted on the PTuning. Ill need to come gawp at it when you're working on it I think Share this post Link to post Share on other sites
Church 209 Report post Posted April 11, 2015 I'm interested a lot in PTuning's header performance aswell. Hard to decide which headers to go with, Nameless, PTuning, JDL EL v2, HKS, Aceheader's. Most available info results comparing apples to oranges, due different stock baselines, differences, if tested tuned or untuned, if on petrol or E85, different other exhaust and intake bits. Share this post Link to post Share on other sites
Kodename47 446 Report post Posted April 11, 2015 I'm interested a lot in PTuning's header performance aswell. Hard to decide which headers to go with, Nameless, PTuning, JDL EL v2, HKS, Aceheader's. Most available info results comparing apples to oranges, due different stock baselines, differences, if tested tuned or untuned, if on petrol or E85, different other exhaust and intake bits. There is a Nameless copy by PLM available. The PLM quality is usually quite good by all accounts and is about half the price of the original.... Share this post Link to post Share on other sites
Church 209 Report post Posted April 11, 2015 It's not price i care about. One time purchase of 500 or $1K .. it won't suddenly bankrupt me, but rather feeling that i could have chosen better one. Simply wishing to get best available at purchase time, but unable to do so based on so far available info due most parts tested/dyno-ed in different ways and not directly comparable due that, hence i always welcome chances to see more test results for supposedly top parts. It's hard to get lot of extra gains while staying NA and petrol, instead of going forced induction and/or E85, hence i'd welcome even just extra 5whp/wtq some bolton part can provide over other .. if it's one time purchase. And not too sure what to think of PLM .. i recall that painful process of Nameless developing it .. 11 prototypes, year of development, lot of flak from community for taking too long .. and now that is rendered nul by somebody simply copying their work. From what i've heard, they did same with copying JDL headers in past aswell. Half price offer is important enough for many to go with that instead of supporting companies with non shady business practices for genuine but more expensive products, so certainly Nameless business will take heavy hit. Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted June 5, 2015 Cancelled the Ptuning. Got one of these on its way...... 3 Lee, Quixote and JamesP1991 reacted to this Share this post Link to post Share on other sites
AJ124 118 Report post Posted June 5, 2015 ACE 4-2-1? Share this post Link to post Share on other sites
Church 209 Report post Posted June 5, 2015 Aye. Just not shown in pic two-tube overpipe part that should come in set. Share this post Link to post Share on other sites
Quixote 35 Report post Posted June 5, 2015 Cancelled the Ptuning. Got one of these on its way...... Good news, I'd like to see what you can do with one of those on an NA car (and how LOUD it gets)! Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted June 5, 2015 Our car is N/A again.......... 2 Quixote and Keethos reacted to this Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted June 8, 2015 HKS catless Headers, Cobra Overpipe , 2nd Cat delete pipe , Resonated Exhaust System and EcuTek quick tune. Other dyno plot is a stock car on our dyno at the Dyno Day we ran sometime ago. Small amount of dyno work think there is more to be found in the tune but torque dip has been removed , torque throughout the rev range up. Start of the development program for the NA boys. Add 40bhp to get an estimate flywheel figure. 3 Keethos, LFA and JamesP1991 reacted to this Share this post Link to post Share on other sites
Tareim 343 Report post Posted June 8, 2015 Mark, what sort of prices are we looking at for a remap? as I have a manifold on order and will be looking at a tune in future to get the most out of it Share this post Link to post Share on other sites
JamesP1991 222 Report post Posted June 8, 2015 Will be watching this thread with intent Mark. Am staying N/A and want to stretch out the motor so will wait to see what other things you get up to. Currently have all the bolt ons you can physically do, so am now at that crossroads on deciding what to do next! Share this post Link to post Share on other sites
Quixote 35 Report post Posted June 8, 2015 I'm sure you can get more out of her Liking the linear power delivery! Share this post Link to post Share on other sites
Kodename47 446 Report post Posted September 18, 2015 I was at Abbey yesterday for my 3rd service and MOT. Thanks again to Mark, Scott and the team.While I was there Mark let me have a prod around the workshop and get some pics:CosworthTomeiAce 1 Keethos reacted to this Share this post Link to post Share on other sites
rob275 1817 Report post Posted September 18, 2015 Much choice! These are all looking great, has Mark freed up any time in his calendar yet? Share this post Link to post Share on other sites
smudge 1020 Report post Posted September 18, 2015 (edited) Much choice! These are all looking great, has Mark freed up any time in his calendar yet?I spoke to him the other day about this and unfortunately nothing yet...Was hoping he could use my Borla UEL in the testing process whilst they had my car in for the engine build Edited September 18, 2015 by smudge Share this post Link to post Share on other sites