surrey86 352 Report post Posted September 14, 2017 It sounds unlikely, they were UEL manifold for years. It's clearly a non issue for a GT86 as this is the first we've ever heard of it Share this post Link to post Share on other sites
Blameshift 2 Report post Posted September 14, 2017 Just now, maurice said: It sounds unlikely, they were UEL manifold for years. It's clearly a non issue for a GT86 as this is the first we've ever heard of it Sounds good. It looks like UEL is the way to go. SUBARU RUMBLE! 1 Cerastes reacted to this Share this post Link to post Share on other sites
Cerastes 204 Report post Posted September 14, 2017 Yay join the rumble in the jungle gang. I still get compliments from people at work "your car sounds nice". Share this post Link to post Share on other sites
Blameshift 2 Report post Posted September 14, 2017 15 minutes ago, Cerastes said: Yay join the rumble in the jungle gang. I still get compliments from people at work "your car sounds nice". I have to ask then...since UEL add a bit more mid-torque and remove a bit of the high end torque how do you feel that? The mid is very appreciated on the gt86/brz as I have figured out but is there a loss of high end that you can actually feel? do you even feel the mid torque boost? driving-wise do you feel a change after having installed UEL headers compared to the standard ones? Share this post Link to post Share on other sites
Cerastes 204 Report post Posted September 14, 2017 I can't say I have noticed at high end, I rarely get it in high revs anyway; which is one of the reasons I went for UEL; better suited for my driving and daily. Share this post Link to post Share on other sites
Blameshift 2 Report post Posted September 14, 2017 Just now, Cerastes said: I can't say I have noticed, I rarely get it in high revs anyway; which is one of the reasons I went for UEL; better suited for my driving and daily. But Did you Feel an increase in mid range power or is it only on paper? Share this post Link to post Share on other sites
Cerastes 204 Report post Posted September 14, 2017 Difficult question to answer, I didn't really notice the so called torque dip before as this car is much more powerful than my previous cars; so it always felt fast to me. I didn't really look at the rev counter when accelerating to see the "torque dip". However lately now I have gotten a little more comfortable and experimenting a little more; I have noticed when accelerating at a low rev it will keep on accelerating at a steady pace; but I assume that is normal anyway? or is that because there is no torque dip now? I don't know. Sorry. In my opinion I didn't notice the difference but I didn't have the car long before I changed it, and I don't do a lot of driving with it so I hadn't gotten use to it. I don't do any motorway speeds so I was always in 4th or 5th gear doing 30-40mph. Share this post Link to post Share on other sites
Andrew Smith 156 Report post Posted September 15, 2017 6 hours ago, Mark-in-Stoke said: Not just here in England but in Staffordshire too! Ooo the bloody cheek!, and by the way those Derbyshire oatcakes are "pants" nowhere near as good as the authentic North Staffs oatcakes 😜 I wondered if you would make an appearance 😋 Now then, about these oatcakes, as all of England and Kent knows the best come direct from my kitchen and I have the waist line to prove it. Staffordshire oatcakes indeed... counterfiets 🌯🌯🌯 1 1 TommyC and Mark-in-Stoke reacted to this Share this post Link to post Share on other sites
Rich 378 Report post Posted September 15, 2017 12 hours ago, Blameshift said: I have to ask then...since UEL add a bit more mid-torque and remove a bit of the high end torque how do you feel that? The mid is very appreciated on the gt86/brz as I have figured out but is there a loss of high end that you can actually feel? do you even feel the mid torque boost? driving-wise do you feel a change after having installed UEL headers compared to the standard ones? I can feel the lack of torque dip, it's quite pronounced (mine is remapped on top of the UEL which helps). Top end I didn't really notice, but then it's up on stock anyway thanks to the remap, so that's not surprising. Share this post Link to post Share on other sites
Nicebiscuit 655 Report post Posted September 15, 2017 15 minutes ago, Cerastes said: Yay join the rumble in the jungle gang. I still get compliments from people at work "your car sounds nice". I have to ask then...since UEL add a bit more mid-torque and remove a bit of the high end torque how do you feel that? The mid is very appreciated on the gt86/brz as I have figured out but is there a loss of high end that you can actually feel? do you even feel the mid torque boost? driving-wise do you feel a change after having installed UEL headers compared to the standard ones? It's losing the 1st cat and the remap that gets rid of the torque dip - there are plenty of dyno charts on here of both EL and UEL and they're not vastly different. So I doubt you'd tell the difference between EL and UEL on the road. But the difference between a stock car and a remapped primary cat-less car is night and day. Has the mid range poke that should have been there in the first place so you don't have to redline it every time to keep the engine in the power band when going up through the gears. I went for UEL but purely for sentimental reasons - I prefer the engine note. So don't agonise over it - either will be great. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Blameshift 2 Report post Posted September 15, 2017 10 hours ago, Nicebiscuit said: It's losing the 1st cat and the remap that gets rid of the torque dip - there are plenty of dyno charts on here of both EL and UEL and they're not vastly different. So I doubt you'd tell the difference between EL and UEL on the road. But the difference between a stock car and a remapped primary cat-less car is night and day. Has the mid range poke that should have been there in the first place so you don't have to redline it every time to keep the engine in the power band when going up through the gears. I went for UEL but purely for sentimental reasons - I prefer the engine note. So don't agonise over it - either will be great. Sent from my iPhone using Tapatalk But I wanna keep my car 100% road legal and therefore removing the 1st cat is not gonna happen am I stuck with the torque dip then? Share this post Link to post Share on other sites
Deacon 1357 Report post Posted September 15, 2017 8 minutes ago, Blameshift said: But I wanna keep my car 100% road legal and therefore removing the 1st cat is not gonna happen am I stuck with the torque dip then? It will still be road legal with the manifold (first) cat removed Share this post Link to post Share on other sites
Blameshift 2 Report post Posted September 15, 2017 Just now, Deacon said: It will still be road legal with the manifold (first) cat removed Aren't the emissions gonna change? Share this post Link to post Share on other sites
Deacon 1357 Report post Posted September 15, 2017 Just now, Blameshift said: Aren't the emissions gonna change? Providing you keep the stock second cat, not enough to become non road legal Share this post Link to post Share on other sites
will300 812 Report post Posted September 15, 2017 There are several aftermarket exhaust manifolds available with a cat in place. I.e. HKS, JDL, H&S, FT86 Speed Factory e.g: FT86 Speed Factory - UEL Manifold Share this post Link to post Share on other sites
Nicebiscuit 655 Report post Posted September 15, 2017 Just now, Deacon said: It will still be road legal with the manifold (first) cat removed Aren't the emissions gonna change? Still passes MOT with the secondary cat only. Plenty have done this... Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Nicebiscuit 655 Report post Posted September 15, 2017 Just now, Deacon said: It will still be road legal with the manifold (first) cat removed Aren't the emissions gonna change? Still passes MOT with the secondary cat only. Plenty have done this... Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
surrey86 352 Report post Posted September 15, 2017 Bear in mind @Blameshift lives in Sweden guys... Share this post Link to post Share on other sites
Lucas 244 Report post Posted September 16, 2017 Scandinavians are really strict when it comes to emissions, that's why I told him he might struggle without a cat.. He should really look for people with twins in Sweden to ask these legal questions Share this post Link to post Share on other sites
Lucas 244 Report post Posted September 16, 2017 @Blameshift find a guy called rs_sweden on Instagram and ask him about these cat-less things Share this post Link to post Share on other sites
Nicebiscuit 655 Report post Posted September 17, 2017 Bear in mind @Blameshift lives in Sweden guys... Ah - missed that- sorry. Completely different kettle of herring then... Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Paul 442 Report post Posted September 17, 2017 On 15/09/2017 at 8:14 PM, Blameshift said: But I wanna keep my car 100% road legal and therefore removing the 1st cat is not gonna happen am I stuck with the torque dip then? You could always......move? Share this post Link to post Share on other sites
Church 209 Report post Posted September 17, 2017 Blameshift: will catted headers also be non-legal by your MOT rules? (eg. FT86SF or JDL?) Does check involves scrupulous visual check for possible aftermarket parts or just OBD reader for codes & exhaust gases check? There is also option like some here do, pile of aftermarket parts get switched back for MOT check and after passing it back to aftermarket. Not choice for me, as I wouldn't like to do two part switches per year, if nothing else, due need to pay extra for shop's work, due possibly weakening connections/threads and maybe need to buy new gaskets/O2 sensors, if they get damaged during switch, if eg. changing header 6 times per 3 years. I'd consider it if MOT checks had been once per two years though. P.S. Does torque dip really bother you that much? When everybody was posting about it .. yeah, i checked/saw it, but in real daily driving i usually drive & gearshift at low rpms below dip, at track, or at overtakes when DD, i downshift, and rpms are always above torque dip, 4K-redline. So in reality i don't care about it anymore. 3 Foulsmell, Blameshift and spikyone reacted to this Share this post Link to post Share on other sites
Nimz 70 Report post Posted September 29, 2017 On 9/17/2017 at 11:17 AM, Paul said: You could always......move? This is clearly the only logical solution, pack your suitcases. Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted September 30, 2017 Broken ringlands are caused by very high cylinder pressures which is caused normally by 2 things 1, to much boost 2, detonation causing high cylinder pressures. If UEL's headers are causing broken ring lands I expect the tune is bad. Share this post Link to post Share on other sites