Tweedbean 151 Report post Posted April 7, 2015 Good afternoon all, I just wanted to check to see if anyone had experienced any ground clearance issues after fitting an after market exhaust 2.5"-3" on a lowered car? Some of the designs such as the Invidia N1 look like they may cause an issue on a lowered car. Share this post Link to post Share on other sites
JamesP1991 222 Report post Posted April 7, 2015 Got an Invidia N1 on mine buddy, it is lowered by 25mm and I have no problems whatsoever, even on speed bumps. Don't know how everyone else gets on, but I would assume it has never been too big of an issue?! Share this post Link to post Share on other sites
smudge 1020 Report post Posted April 7, 2015 My pipe into the back box used to hit bumps but I am lowered about 50mm if not more... Share this post Link to post Share on other sites
Lauren 2259 Report post Posted April 7, 2015 It's an issue on the bigger square type speed humps for me dropped 20mm or so with a Milltek. Though I do wonder if it's the undertray on the box that's actually scraping over the exhaust. 1 KevinA reacted to this Share this post Link to post Share on other sites
chillismoke 182 Report post Posted April 7, 2015 I think this is an Invidia N1 on Debbie & Kevins car: Its low but looks a lot better located than others ive seen, like Marks for instance: Share this post Link to post Share on other sites
Tareim 343 Report post Posted April 7, 2015 I think this is an Invidia N1 on Debbie & Kevins car: Its low but looks a lot better located than others ive seen, like Marks for instance: The first one is an ARK DTS, it says on the pipe going between both boxes lol and never realised those boxes on Mark's were that low, wonder if he's had any problems Share this post Link to post Share on other sites
rob275 1817 Report post Posted April 7, 2015 No issues with my milltek, a few people do have issues though. Share this post Link to post Share on other sites
Mark-in-Stoke 488 Report post Posted April 7, 2015 He he thanks Skally, the lower of the two sometimes hit the square type ramps apart from that it was fine. This system was binned a while back for the milltek, I liked the sound but not the uneven look of the old one, much happier now. Share this post Link to post Share on other sites
Tweedbean 151 Report post Posted April 7, 2015 I'm looking at a 3" Perrin exhaust. Looking at these the twin box exhaust seem to sit lower than the single combined back box. Share this post Link to post Share on other sites
Mark-in-Stoke 488 Report post Posted April 7, 2015 You really need to see the one you want on an 86, take no notice of the one on mine. It might be worth waiting for japfest and having a look around. Share this post Link to post Share on other sites
Mark-in-Stoke 488 Report post Posted April 7, 2015 You really need to see the one you want on an 86, take no notice of the one on mine. It might be worth waiting for japfest and having a look around. Share this post Link to post Share on other sites
GT86-Ian 351 Report post Posted April 7, 2015 Kevin has the ARK DTS I have the Grip on mine. Share this post Link to post Share on other sites
KevinA 695 Report post Posted April 7, 2015 Yep ARK DTS and no clearance problems as jet. Share this post Link to post Share on other sites
GT86Jay 202 Report post Posted April 8, 2015 Never had a problem with my Cobra system. And I've been very low! Now at around 25mm and its perfect. Never not been able to get somewhere or over a bump etc.... Share this post Link to post Share on other sites