Danellen2989

The black and red gearknob is wrong, I'm sure reverse is up and left, not down and right; correct me if I am wrong as I may be getting it confused with company vans. 

The forge one does not make a noise as BOV or dump valve ones would. The AVO 50/50 atmospheric/recirc dumps out 50% air giving a mild dump valve noise

Hello guys,
 
Sorry I have not been on here much recently. I have tons of new mods which I have had fitted to the car. Latest pics below.
 
Mods include:
AVO Thermostatically Controlled Oil Cooler
KW Club Sport 2 Way Adjustable W/Top Mounts
SPL Titanium Rear Lower Camber Arms
Whiteline 18mm Rear Anti Roll Bar
Whiteline 22mm Front Anti Roll Bar
Whiteline Front Sway Bar End Links
Whiteline Rear Sway Bar End Links
Whiteline Sway Bar Mount Brace
Full poly bushes all round
Uprated sway bars
Mtec Shifter Springs
Mtec Clutch Spring
Rota T2R 18" 9.5 Front + Rear Flat Black
TRD rear ducktail spoiler
TRD rear side spoilers
TRD aero C-pillar fins
TRD canards
TRD side fenders
Seibon TS Style Carbon Fibre Hood W/Aerocatches.
Thanks to fensport for recently fitting my carbon hood and modifying it for the aerocatches in the position I wanted!! Top work!
 
 

Deacon I believe they are 6kg/mm front and 7kg/mm rear.
 
i absolutely love the chassis mods. The poly bushes tighten everything up. I didn't notice massive amounts of NVH, the gains outweigh any negative NVH. ARBs are nice and firm and hardly any body roll in corners and entering corners at fast speeds feels even more comfortable and grippier. The car is lowered and speed bumps can be an issue. Smaller ones are fine but the larger ones can be difficult. The ride is a bit firmer. I'm yet to experience the car on the track so I'm also yet to test its limits with handling etc.

Im considering getting a different bonnet for mine so mine may become available? How much would you be willing to pay? Mine is pearl white

The bottom panel simply pops out. Best way is to put your fingers in the little compartment, with the other hand try to grip onto the surround of the start button and pull towards you and it will snap out. Then it's just a matter of changing over the start button which is easy enough

My inspiration came from this picture - same fitment. 18x9.5 ET40
 

 

Ok guys so to go onto my ICE which I installed a few months ago.

The set-up is as follows:
Standard headunit signals out into...
Audison Bit One DSP into
JL Audio HD 900/5 amp which powers
Audison Voce AV K6 2-way components in the front
Rears are standard
And I have a JL Audio GT86 Stealthbox made and shipped in for me.
The amp, power distribution block, grounding distribution block, and the DSP is nicely out of the way and hidden in my own wooden enclosure in the cavity where the spare wheel would go under the boot flooring.

Verdict? Frigging awesome sound set-up.
Future plans? Install another JL Audio HD 900/5 amp. Install some bigger speakers to replace the rears. Consider installing 2.5" mid range speakers (the speaker grilles on dash have the capability for them already)


Picture of the JL Audio Stealthbox in the boot...very OEM look.

Keethos, thank you! I'll be sure to let you guys know my feedback. Must say though, far my dealings with fensport have been very good, albeit only planning my above mods over the phone with Tony.

Nikndel I'll be completely honest - I've never been to any of the events. I may consider going to one when the kit is installed, and hopefully see you there along with some other guys from this site.

Keethos, thank you! I'll be sure to let you guys know my feedback. Must say though, far my dealings with fensport have been very good, albeit only planning my above mods over the phone with Tony.

Nikndel I'll be completely honest - I've never been to any of the events. I may consider going to one when the kit is installed, and hopefully see you there along with some other guys from this site.