Mark@Abbey M/S 235 Report post Posted September 15, 2015 (edited) On its way to Abbey MotorsportHarrop Tuner kit will be £3938.40 inc vat landed in the UK. Edited September 17, 2015 by Mark@Abbey M/S 1 long-gone reacted to this Share this post Link to post Share on other sites
smudge 1020 Report post Posted September 15, 2015 You'll have to make a new thread with a huge comparison of everything once you've run them all Mark 1 Keethos reacted to this Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted November 18, 2015 (edited) Well kit is here, looks real nice like the Cosworth and Sprintex SC kits do; No need to remove the front bumper to fit the charge cooler radiator. Water pipes very neat and no coolant reservoir, the coolant is held in the back of the charger cooler assemblies; Comes fitted with a post charger IAT sensor already fitted; Just need time to get it fitted and tuned now ;-) Edited January 21, 2016 by Mark@Abbey M/S 3 long-gone, tegunulgener and Keethos reacted to this Share this post Link to post Share on other sites
rob275 1817 Report post Posted November 18, 2015 Make sure that's laid out for me to have a look at on Friday :D Share this post Link to post Share on other sites
smudge 1020 Report post Posted November 19, 2015 5 hours ago, rob275 said: Make sure that's laid out for me to have a look at on Friday :D Why you there Friday? Spying on my car? Share this post Link to post Share on other sites
rob275 1817 Report post Posted November 19, 2015 7 hours ago, smudge said: Why you there Friday? Spying on my car? I have my service and an engine swap booked in. Mark said he has a sprintex 335 on a grey 86 he can swap in. 2 Kodename47 and Mark-in-Stoke reacted to this Share this post Link to post Share on other sites
smudge 1020 Report post Posted November 19, 2015 5 hours ago, rob275 said: I have my service and an engine swap booked in. Mark said he has a sprintex 335 on a grey 86 he can swap in. Just send £15k to me and you can have it Share this post Link to post Share on other sites
Kodename47 446 Report post Posted November 19, 2015 59 minutes ago, smudge said: Just send £15k to me and you can have it Didn't realise you'd sell your car for that much.... bargain! 1 Tareim reacted to this Share this post Link to post Share on other sites
smudge 1020 Report post Posted November 19, 2015 5 minutes ago, knightryder said: Didn't realise you'd sell your car for that much.... bargain! The engine alone nob-head Share this post Link to post Share on other sites
Kodename47 446 Report post Posted November 20, 2015 17 hours ago, smudge said: The engine alone nob-head Wishful thinking.... Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted January 19, 2016 Dyno time soon , totally stock other than the Harrop thou at the moment for base line tuning , 3 Keethos, Gringosteve and rob275 reacted to this Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted January 21, 2016 Totally stock exhaust fitted + Harrop and a ECUTEK tune against a totally stock car (our Demo car again) Log from ECU 0.7bar top end , IAT all under control , I have some more datalogs to look through and will get them posted up 4 dyno pulls back to back IATs all kept under control Hope to have a drive tomorrow, car sounds like a stock car , afraid there isn't any whine from the Harrop which is a little upsetting but as it is a proper stealth car. 1 Rich reacted to this Share this post Link to post Share on other sites
rob275 1817 Report post Posted January 21, 2016 This is looking extremely promising. I'm going to miss whine if I went for it.... 2 Keethos and Rich reacted to this Share this post Link to post Share on other sites
Nicebiscuit 655 Report post Posted January 21, 2016 That is impressive. Look at all that torque with no holes in it! Share this post Link to post Share on other sites
Gringosteve 213 Report post Posted January 21, 2016 How much to fit and tune dudes, and how come it doesn't whine? 1 long-gone reacted to this Share this post Link to post Share on other sites
Kodename47 446 Report post Posted January 21, 2016 11 minutes ago, Gringosteve said: how come it doesn't whine? Because it's not a twin screw 1 Gringosteve reacted to this Share this post Link to post Share on other sites
Gringosteve 213 Report post Posted January 21, 2016 Ahh, the curves look epic! Share this post Link to post Share on other sites
Bles 32 Report post Posted January 22, 2016 This is looking very good. I take it these figures are at the rear wheels so add about 40hp for drive train losses at the flywheel. Share this post Link to post Share on other sites
Kodename47 446 Report post Posted January 22, 2016 8 minutes ago, Bles said: This is looking very good. I take it these figures are at the rear wheels so add about 40hp for drive train losses at the flywheel. They are at the hub, yes. Share this post Link to post Share on other sites
Nicebiscuit 655 Report post Posted January 22, 2016 Ahh, the curves look epic! They're that smooth I think he just drew them in with a big set of protractors ;-) Share this post Link to post Share on other sites
long-gone 152 Report post Posted February 29, 2016 On 21/01/2016 at 8:44 PM, Gringosteve said: How much to fit and tune dudes, and how come it doesn't whine? Have I missed the answer to this? Share this post Link to post Share on other sites
DanJ 374 Report post Posted February 29, 2016 It doesn't whine because it's a roots type supercharger, the Sprintex which does whine is a twin-screw. Sent from my Nexus 5 using Tapatalk Share this post Link to post Share on other sites
Bles 32 Report post Posted February 29, 2016 2 hours ago, daidaiiro said: Have I missed the answer to this? Am having mine fitted in April, but best ask Mark via a private message for an actual quote 1 long-gone reacted to this Share this post Link to post Share on other sites
rob275 1817 Report post Posted February 29, 2016 @daidaiiro It's difficult to answer, the prices are liable to change assume the kit stays at £4k, tune around £300, day and half of labour or so i'd say budget £5k. You can email Mark or call him and he can give you a quote. 1 long-gone reacted to this Share this post Link to post Share on other sites
long-gone 152 Report post Posted February 29, 2016 Understood, thanks. Will contact them direct. Share this post Link to post Share on other sites