Devo
-
Content Count
39 -
Joined
-
Last visited
Reputation Activity
-
Devo got a reaction from Angelina in How to import bodykit from US.
Currently talking to HZ Performance which seem to think that they might have the same bodykit in stock, just waiting for confirmation and detailed photos.
The HT Autos has simillar front lip but the sides and rear are just simple plastic extension pieces that bolt under the car. I like the other kit because it slight goes over the cars body making it almost a bodykit not just little extension pieces.
Anyone up for group buy?
-
Devo got a reaction from Adi in Cap on the front bumper
This is the headlight washer cap and Toyota will supply the part painted in the colour of your car if you give them your vin. The part delivered cost me around £50-£60 each when I replaced mine. (Expensive for tiny little bit of plastic) However I found it impossible to find it on ebay so dealership was the only option.
-
Devo got a reaction from sam534 in Anyone know the part?
I found that only plastic welding works well for these type of parts. You can use a cheap 40v soldering iron to melt the plastics and grab some scrap pp
-
Devo got a reaction from Lucas in BRZ Headlight(s)
I had to order mine used from USA as the price for just the complete unit here was around 800-900 at dealership for one headlight. I managed to source a used complete headlight for around £260 using global shipping on eBay.com. The light pattern in USA is flat so it will still pass MOT.
Only one other option would be to buy an aftermarket set of headlights from fensport for around 450. Then I would probably sell the other Brz headlight on eBay.
-
-
Devo got a reaction from Adi in Cap on the front bumper
This is the headlight washer cap and Toyota will supply the part painted in the colour of your car if you give them your vin. The part delivered cost me around £50-£60 each when I replaced mine. (Expensive for tiny little bit of plastic) However I found it impossible to find it on ebay so dealership was the only option.
-
Devo got a reaction from bryan.inns in Winter layover now can't open door.
I've had my car parked up for couple months and first time I had to unlock manually using the key blade was scary. It's really stiff and looked like it was going to break. I spent few minutes wiggling the blade left and right and after some time managed to turn it. Good luck with it and it will defiently turn, just very stiff.
-
Devo reacted to Rich in Headlight adjustment for lowered cars
If you spin the bolt too far it may slip and no longer be aligned with the screw threads. You can get it back in, but it requires removing the headlight motor (which generally requires removing the headlight). It's fixable, but a pain.
-
Devo got a reaction from ScottAddison in **** SOLD****ROCKET BUNNY V1 SKIRTS
How much for the skirts as I don't think the front lip would fit my brz