Foulsmell 120 Report post Posted August 17, 2017 It's only between 3k-4K revs. Drive one and you won't even notice it as depending what you want to do you should be in the correct gear. This my graph to compare with the others. K&N panel filter, full Milltek exhaust, stock manifold and remap. The dip is mostly still there but not much difference in peak figures 1 Lucas reacted to this Share this post Link to post Share on other sites
Lucas 244 Report post Posted August 17, 2017 2 minutes ago, Foulsmell said: It's only between 3k-4K revs. Drive one and you won't even notice it as depending what you want to do you should be in the correct gear. I agree, I think that this is what makes these cars so fun, you have to actually drive it, rev high to achieve the best experience. It's just an NA after all. Besides, it's not like it's not possible to sort it out with a tune and a manifold. Lauren's results are great. 1 Foulsmell reacted to this Share this post Link to post Share on other sites
Foulsmell 120 Report post Posted August 17, 2017 To compare my graph with Lauren's it seems to me that the stock manifold ain't that bad, it's just that there is a CAT in the way. I'd love to see a gutted stock CAT properly tuned graph compared to an aftermarket manifold. Share this post Link to post Share on other sites
TTR 509 Report post Posted August 17, 2017 13 minutes ago, Foulsmell said: To compare my graph with Lauren's it seems to me that the stock manifold ain't that bad, it's just that there is a CAT in the way. I'd love to see a gutted stock CAT properly tuned graph compared to an aftermarket manifold. I think Abbey Motorsports did that and got some really decent results. Share this post Link to post Share on other sites
Lauren 2259 Report post Posted August 17, 2017 14 minutes ago, TTR said: I think Abbey Motorsports did that and got some really decent results. I don't think Mark got as far as actual testing, so we don't know the results. It seems that most opt for an aftermarket manifold rather than decatting the original which does involve some fabrication. So I don't think it was popular enough to warrant taking further by the looks of it. Share this post Link to post Share on other sites
Ade 517 Report post Posted August 17, 2017 51 minutes ago, Lauren said: I don't think Mark got as far as actual testing, so we don't know the results. It seems that most opt for an aftermarket manifold rather than decatting the original which does involve some fabrication. So I don't think it was popular enough to warrant taking further by the looks of it. There's a few thread on the ft86club. One persona gained about 5hp iirc. Steve Knight was the 1st mani Mark at Abbey decatted but they didnt get before and after unfortunately. I fancy picking up a new 2017 manifold and decatting it. Share this post Link to post Share on other sites
Foulsmell 120 Report post Posted August 17, 2017 14 minutes ago, TTR said: I think Abbey Motorsports did that and got some really decent results. I don't think Mark got as far as actual testing, so we don't know the results. It seems that most opt for an aftermarket manifold rather than decatting the original which does involve some fabrication. So I don't think it was popular enough to warrant taking further by the looks of it. The one I saw on FT86 the cat was just smashed and no fabrication was needed. I'm thinking if you get around 70% of the gains of aftermarket for free then there isn't much case for paying £800 for the extra 30% for a road car. Track would be different. Share this post Link to post Share on other sites
Foulsmell 120 Report post Posted August 17, 2017 14 minutes ago, TTR said: I think Abbey Motorsports did that and got some really decent results. I don't think Mark got as far as actual testing, so we don't know the results. It seems that most opt for an aftermarket manifold rather than decatting the original which does involve some fabrication. So I don't think it was popular enough to warrant taking further by the looks of it. The one I saw on FT86 the cat was just smashed and no fabrication was needed. I'm thinking if you get around 70% of the gains of aftermarket for free then there isn't much case for paying £800 for the extra 30% for a road car. Track would be different. Share this post Link to post Share on other sites
Foulsmell 120 Report post Posted August 17, 2017 14 minutes ago, TTR said: I think Abbey Motorsports did that and got some really decent results. I don't think Mark got as far as actual testing, so we don't know the results. It seems that most opt for an aftermarket manifold rather than decatting the original which does involve some fabrication. So I don't think it was popular enough to warrant taking further by the looks of it. The one I saw on FT86 the cat was just smashed and no fabrication was needed. I'm thinking if you get around 70% of the gains of aftermarket for free then there isn't much case for paying £800 for the extra 30% for a road car. Track would be different. Share this post Link to post Share on other sites
Lauren 2259 Report post Posted August 17, 2017 Just now, Foulsmell said: The one I saw on FT86 the cat was just smashed and no fabrication was needed. I'm thinking if you get around 70% of the gains of aftermarket for free then there isn't much case for paying £800 for the extra 30% for a road car. Track would be different. Well you could just smash out the cat, that is a way of doing it. You will need to remap to make the most out of it though. That cost is there whatever you do. I think the bigger gains on the aftermarket manifolds are where they have longer primary pipes as they don't have to allow for the length of the cat. Though it's cheap to smash the cat out (I have a manifold with primary cat you can buy if you want?) it's not having the knowledge of what the actual gains are that is the risk I guess. I expect you are bound to gain something though, but what is hard to say. The extra torque from an aftermarket manifold is far more useful on the road than it is on the track as it's the big mid range increase you notice the most. You don't really see that gain on the track so much as are in the higher rpm range more of the time. Share this post Link to post Share on other sites
KevinA 695 Report post Posted August 17, 2017 Think that sorts that one Share this post Link to post Share on other sites
Foulsmell 120 Report post Posted August 17, 2017 I found this last time I looked. Share this post Link to post Share on other sites
Varelco 211 Report post Posted August 17, 2017 I emailed mark about converting my stock manifold to catless as Abbey offered that service. In a nutshell its pretty pointless for the cost time and effort. 1 Foulsmell reacted to this Share this post Link to post Share on other sites