LFA 68 Report post Posted March 13, 2015 Anyone run a Milltek unres or other louder pipe set up at Bedford, without falling foul of the noise limits? Share this post Link to post Share on other sites
Lauren 2259 Report post Posted March 13, 2015 Remind me what the noise limits are? Mine was 93db last time it was tested. So should be okay. Would be surprised if it failed anywhere. Well it might fail at the moment as it is cracked (again). Share this post Link to post Share on other sites
LFA 68 Report post Posted March 13, 2015 101, 87.5 drive by Share this post Link to post Share on other sites
Lauren 2259 Report post Posted March 13, 2015 Reckon you'll be alright. I wouldn't be too worried by that. 1 LFA reacted to this Share this post Link to post Share on other sites
Lauren 2259 Report post Posted March 13, 2015 I have a Milltek non-res with a 2nd cat delete. I'd be absolutely amazed if it failed a noise test at any circuit. I guess that's what I'm saying. Share this post Link to post Share on other sites
Quixote 35 Report post Posted March 13, 2015 I ran Milltek unres no probs at Bedford at the Toyota evening I can't remember what the noise was but it was well within the limits Share this post Link to post Share on other sites
Mark@Abbey M/S 235 Report post Posted March 13, 2015 You guys haven't got a SC helping to move more air! Share this post Link to post Share on other sites
LFA 68 Report post Posted March 13, 2015 Might have to see if it will pass. Share this post Link to post Share on other sites
rob275 1817 Report post Posted March 13, 2015 You guys haven't got a SC helping to move more air! I will admit, the charger does make is noisier. But i'm sure i was well under limit during my last noise test. You should be fine Ed Share this post Link to post Share on other sites
Quixote 35 Report post Posted March 13, 2015 You guys haven't got a SC helping to move more air yet! Fixed it for you Mark 1 Mark@Abbey M/S reacted to this Share this post Link to post Share on other sites
LFA 68 Report post Posted March 18, 2015 I'll be there week on Saturday. I'll report back Share this post Link to post Share on other sites
Special K 442 Report post Posted March 19, 2015 Remind me what the noise limits are? Mine was 93db last time it was tested. So should be okay. Would be surprised if it failed anywhere. Well it might fail at the moment as it is cracked (again). Hmm... sounds like Rich needs to have stern words with them... Toyo dealer defaulting a Milltek twice? Spec K Share this post Link to post Share on other sites
Lauren 2259 Report post Posted March 19, 2015 It's not Richard's fault Milltek can't make exhausts that don't crack. If this one goes, I'll be getting something else. Share this post Link to post Share on other sites
LFA 68 Report post Posted March 26, 2015 Booked for Saturday. Let's hope it passes ........ so I can drive in pouring rain and gale force winds Share this post Link to post Share on other sites
LFA 68 Report post Posted March 28, 2015 94.1 No problem 1 Keethos reacted to this Share this post Link to post Share on other sites