Bail 33 Report post Posted June 10, 2014 One of these is not like the other, Can you spot it... Share this post Link to post Share on other sites
Kodename47 446 Report post Posted June 10, 2014 Are you "indicating" that something has changed? Share this post Link to post Share on other sites
faith 237 Report post Posted June 10, 2014 You are only allowed to turn left ;-) Share this post Link to post Share on other sites
Bail 33 Report post Posted June 10, 2014 Not wired in yet, but fitted and I've not broken the autofold or positioning. Running the wires through was a PITA though, suspect running it in the car will be just the same. Love the look though Share this post Link to post Share on other sites
Mike 458 Report post Posted June 10, 2014 Are you "indicating" that something has changed? Share this post Link to post Share on other sites
Keethos 842 Report post Posted June 11, 2014 Awesome stuff, looking forward to the finished article! Are these units whole wing minor replacements or are they just the back cover replacements? Share this post Link to post Share on other sites
Bail 33 Report post Posted June 11, 2014 I fitted my driver side LED wing mirror today, neither are wired up yet, but they are at least fitted and on the car and the doors back together... However there are one or two wires floating around inside the cabin. I've also FINALLY fitted my Tarmac Sportz bonnet dampers which I've had sitting around since January! But FUUUUUUUUU! Wring them up is a nightmare though! The flasher relay is a) impossible to get off the cable behind so short and compressed I can't get my fat fingers in there. Puddle lamps work, but the indicators are a right P I T A!!! I shall perservere... Share this post Link to post Share on other sites
Twigman 93 Report post Posted June 11, 2014 That wiring looks a bastard....... I think I might give this mod a miss. Share this post Link to post Share on other sites
Bail 33 Report post Posted June 11, 2014 They look amazing. But I failed to wrap a wire in the drivers door so have a ratttle, and have a continuity failure on the passenger side indicator (luckily on the easy to get a lead, rather than the through the door nightmare). I also have 3 out of the 4 connectors for the indicator but failed with the 4th... The puddle lamps work though! So yeah, it's not an easy one, it would be amazing if I could take the doors and dashboard apart though However, I love how they look and will report back on their effeciveness in terms of light, but the puddle lamps seem cool. Suspect I might try swapping the LEDs for a super bright varient though. Share this post Link to post Share on other sites
GT86-Ian 351 Report post Posted June 11, 2014 You'll need to remove some of the plastic sheath around the flasher unit cables to be able to connect any wires. Share this post Link to post Share on other sites