GT86-Ian 351 Report post Posted February 16, 2014 Fitting the Fensport Rear Lower Bumper Diffuser, tools required phillips screwdriver & drill.Remove these plugsYou should remove the four in the middle & two outside onesWhen fitting the diffuser start with the outside clips (you are supplied with new screws but I managed to fit the original clips)Drill hole Share this post Link to post Share on other sites
Special K 442 Report post Posted February 17, 2014 Nice one, Ian! Your rear end never looked so good....Spec K Share this post Link to post Share on other sites
faith 237 Report post Posted February 17, 2014 Very nice indeed Ian! Here is my contribution to the "how to fit a rear diffuser". However, I didn't bother with the two side screws and I decided to put mine up on ramps Share this post Link to post Share on other sites
Special K 442 Report post Posted February 17, 2014 Hey, Faith, I'm impressed!! My missus doesn't know how to hold a drill, let alone use it...Spec K Share this post Link to post Share on other sites
Panigale 6 Report post Posted September 14, 2015 Fitting the Fensport Rear Lower Bumper Diffuser, tools required phillips screwdriver & drill. Remove these plugs You should remove the four in the middle & two outside ones When fitting the diffuser start with the outside clips (you are supplied with new screws but I managed to fit the original clips) Drill hole Thanks for the information and close up images Ian - definitely like the idea of one of these diffusers. 1 GT86-Ian reacted to this Share this post Link to post Share on other sites
remal 85 Report post Posted January 28, 2016 handy tips as to be expected from the forum members. And possibly a mod to add to ours this year 1 GT86-Ian reacted to this Share this post Link to post Share on other sites
Test Drives Unlimited 278 Report post Posted January 28, 2016 I took the easy way out and Paid Fensport to fit the item to my car this week Sent from my Archos 53 Platinum using Tapatalk 1 GT86-Ian reacted to this Share this post Link to post Share on other sites
Cerastes 204 Report post Posted April 20, 2017 Thanks for the guide. Unfortunately mine will be a lot trickier. Mine arrived with no holes in it. Share this post Link to post Share on other sites