Tenchy 3 Report post Posted April 23, 2017 Just fitted an Edelbrock Supercharger to my GT86 and for anybody considering fitment there are a couple of mods that need to be made to the kit. The mods are nothing major and are as a result of the kit being designed for a LHD model. Mods as follows: 1. You will need to extend the intercooler water pump wiring loom so that it reaches the battery. 2. You will need to modify the brake booster hose so that it reaches the nose of the supercharger. The kit hose is to short, I split the hose and added in a length of copper pipework to extend the length. 3. Use jubilee clips on the hose fitments to the rear of the supercharger as the kit clips are virtually impossible to fit due to the confined space behind the supercharger. All in all though a pretty straight forward kit to fit and it looks great under the hood. Mark from Abbey has provided me with a base map and am awaiting the final tune on the Dyno. Driveability is superb with very linear power delivery, looking forward to seeing what she will produce on the Dyno. Tenchy 3 Kodename47, Keethos and Ztox reacted to this Share this post Link to post Share on other sites
Kodename47 446 Report post Posted April 23, 2017 Good to hear you're still enjoying it. Wonder whether it's worth posting this up on the FT86Club Edelbrock thread, might get their attention http://www.ft86club.com/forums/showthread.php?t=93718 Steve Share this post Link to post Share on other sites