Jump to content

Beney86

Members
  • Content Count

    47
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Beney86


  1. Hello all, Selling my JR3 Wheels- 18x9 ET40 5x100/108 White (fits stock suspension without rubbing or scrapping). Wrapped in Ps4 tyres with loads of life on them.

    Some curbing on 2 of the wheels shown in pictures, but no cracks or anything detrimental- Tyres all on good condition. 

    Comes with spigot rings to fit the gt86/brz

    Looking for £750

    Pick up only from Oakthrope in east midlands 

    IMG_20220710_190922.jpg

    IMG_20220710_190939.jpg

    IMG_20220710_190953.jpg

    IMG_20220710_191018.jpg

    IMG_20220710_191001.jpg


  2. I looked through the service history of my vehicle after i bought it, all serviced by Toyota. wrong oil used every time, Diff oil, gear box, brake fluid, nothing was changed ever at any of the correct intervals or just missed completely. First thing i did was buy all the fluids myself and book it into a local garage so I know from my ownership it'll all be followed correctly from a fresh start.


  3. Hello mate, yes there was no problem with the reverse sensors. I think there is a slight fitment issue with the non 2017 rear bumper (i think the bottom bit near the fog lamp is lightly different) 

    It did go on ok, but it wouldnt sit completely flush against the bottom, there is about a 1cm gap. same with the area i circled, we couldn't get the bumper to mould around this area flush either but i think thats again due to the bottom bit maybe touching something .This could have been to maybe not cutting enough of the factory bumper, but we couldn't see where it was touching and being prevented

    Overall its not that bad though, i will have a bodyshop try and heat it up and clamp the order with some super adhesive glue.

    image.png.0a760d2f09cfa79c87af6ea4520451c0.pngimage.png.985d5528f3dcd405ef2f3950a27f2be2.png


  4.  Hello,

    Oem white bumper from a 2014 Gt86 for sale. Comes with the Ht auto lip attached, the fog light bezels, the fog lights and indicators all attached as seen in the picture.

    Condition is good, has some small stone chips as expected. A little scuff on Ht auto lip on the passenger side but not really noticeable. All the bumper tabs are intact.

    Looking for £350 and is pick up only from the Measham/Swadlincote area of the midlands.

    IMG_20210425_150826.jpg.b00d9431f66baef2445de861fe19228f.jpg

    IMG_20210425_150846.jpg.1a9357ab3bc5de556cd33c96fe763e37.jpg

    IMG_20210425_150840.jpg.9f64d75332f294a0d73201c80a0cafde.jpg

    IMG_20210425_150853.jpg.2058d1e5681372ed03ad8287fb4a0485.jpg

    IMG_20210425_150905.jpg.dc1ee1a44e8c3651e0978f04054ce4f7.jpg


  5. Hello,

    For sale are my Carlab Smoked LED Tail lights which fit 2012-2016 Gt86/brz  (replicas of the Spec-D lights). These were on my car for about 6 months before changing up my build style. All worked in perfect condition, plug and play without issues. Not scratch's or scuffs. Resistors already installed to prevent hyper flashing with indicators.

    Never had any issues with Leaking or condensation build up.

    Asking price £150 for the pair. Pick up only (do not want them damaged in transport), Based near Measham/Swadlincote  in the midlands. 

    IMG_20210424_164223.thumb.jpg.3b7070816895f877698598ea929df7da.jpg

    IMG_20210424_164307.thumb.jpg.26a3f8c57b5a39816795abe0f5027caf.jpg

    IMG_20210424_164346.thumb.jpg.93f0c92220fdc798b3f480df3449fc3a.jpg

    IMG_20210424_164328.thumb.jpg.6bf93f05177df0fa73b989c4e0f5bdf9.jpg

    Boomerang DRL, Circle brake lights.

    IMG_20190510_182527.jpg.14f1bf2aa3d6345cfd8c6736091215df.jpg


  6. I would go for the newer one if it isnt too much financially different. My car had a full service history from toyota but that honestly just made me more worried now for future purposes.

    The grade oil was used for one of the services, completely failed to adhere to any of the service intervals too. I first assume oh good full history thats good but on further inspection i was shocked. The gearbox and diff oil had never been changed untill i did them at 40k miles and its a 2014 plate.

    Now i just service the car myself every 5k miles and have my work (an aerospace garage) carry out an inspection for the paperwork and peace of mind. And when the car goes turbo next year, i defo aint letting toyota touch it


  7. 16 hours ago, BRZ-123 said:

    Really like the air scoop on the bonnet. Is there a metal one available in similar design. Do you know?

    Sent from my SM-G970F using Tapatalk
     

    Hi Mate, i've not really seen any metal aftermarket bonnets at all tbh. Other than these carbon fibre ones, I've seen Ram air have full fibreglass bonnet with a scoop in US. But the price and shipping brings it to the same price as seibon ones 


  8. 2 minutes ago, Deacon said:

    I believe the EcuTek only rev matches with braking but I may be wrong.

    Cheers mate, i assumed it did too which is why i bought this up :D seen some of the US 86 tunes seem to just have it all the time, but they mainly use cobb shelf tunes


  9. 1 hour ago, Deacon said:

    It's probably a bit of both. I have it on the EcuTek setting I use but also try to do it myself.

    Does your Ecutek have it set to only do it while braking? or is there an option to have it rev match without braking? 


  10. Hi Everyone,

    I've been looking at purchasing a wing for the 86, deciding to either weld plates to cover the oem holes and paint it or just go for an OEM looking carbon fiber boot.

    What is the general concensus on wing support on a carbon boot? i've seen loads of pictures of people doing it, some post and people saying absolutely do not do it as it can crack and warp the boot.

    Im not talking about massive GT wings or anything, something more similer to the Aero oem wing or seibon mid-sized wings like the AG-style.

     


  11. Hello everyone,

    I've already placed an order with fensport for the v2 TRD rear bumper as seen below. My car has the (i believe factory) reverse sensors, now that im looking at the pictures of my car i'm guessing i'll need to either get them moved higher up or buy a 2nd hand bumper and fit new sensors?

    Has anyone else tried or seen that this works without modification?

     

    MINUTE CARPORN - White 860 Toyota 86 (racs_09) - YouTube

    image.png.ca53d039dadb293202c54f52054fcd5a.png


  12. I actually had a weird issue with the Auto-Vox dash cam mirror, my car would stay in aux mode when i turned the car off- i couldn't lock the car using the key or fob. It would just beep at me, sometimes being a 5 second long solid beep. after about 1-2 mins of being away from the car i could then lock it. After about 3 months of this issue thinking it was wifi signals or a sensor problem with my car.I changed my key fob battery twice just incase. I finally noticed (i dont know how i didn't before) that the cash cam was not powering down when the car turned off and was drawing signal from the glove box connection. Being able to finally lock the car was due to the dash cam finally powering down. Unplugged the dash cam and never had the issue again. 

    Probably completely unrelated to your issue, but maybe someone in the future might come across this :P


  13. Hi Guys and girls,

    Came back from Tuning development yesterday, just had the NA package done. UEL and Super resonated exhaust combo. Sounds fantastic, no drone, no rasp; Can still have a convo while car is on but when you put your foot down you have that nice grumble. Its a very noticeable driving difference, making an already fun car even more enjoyable now i can finally feel slightly ASBO with my right foot.

    Big thank you to @Mike@TD.co.uk for getting it sorted for me and all the info i kept asking about, and to the other lad down there (sorry i didn't catch your name) for selling me into the turbo kit. Mike will give you sales commission i'm sure lmao.

     

    Going to be posting Dyno sheet and a video of the exhaust sound while driving etc tomorrow. As i tried to find this combo on YouTube before purchasing but could only find the Exhaust with standard manifold or UEL with normal rez/ no rez; even tried messaging a few forum users who have the setup if they had any clips. So hopefully if my mic does the sound justice it might help others to make an informed decision.

     

     

×