ethanol800 0 Report post Posted April 26, 2019 I'm trying to replace my orange front indicator bulbs with some silver ones to tidy the front end a bit. I've had difficulty finding any information on this. Can someone tell me, are these compatible, just thinking about them being led as opposed to filament. Cheers, car is 62 plate 86. Sent from my Pixel 2 XL using Tapatalk Share this post Link to post Share on other sites
Tarnish3 0 Report post Posted April 27, 2019 I replaced front and rear with chromed indicator bulbs from Amber Motorsports They were incandencent bulbs instead of LED, but worked well and got rid of the 'fried-egg' appearance. I've since replaced the back with Valenti's anyway. I swapped indicators on a previous car to LED type, but that caused warnings on the dash due to less load. Perhaps the GT86 being a more modern car will not have that problem, I don't know. Share this post Link to post Share on other sites
Kodename47 446 Report post Posted April 28, 2019 It doesn't have Canbus for the lights so you wont get errors if you swap to LEDs but you'll get the "hyperflash" that you get with a blown bulb. You need to either buy a replacement flasher relay, which is easy to replace, or mod the OEM one with resistors, simple to do if you can solder. Or you can buy resistor packs to fit by the lights, but I've always said this is least preferable due to the heat they emit. Not so much an issue on the front as they'd be well ventilated but in the rear you'd have to have them around the boot liner trim. Share this post Link to post Share on other sites
ethanol800 0 Report post Posted May 2, 2019 Thanks guys, I found the same bulbs on euro car parts.https://www.eurocarparts.com/ecp/p/car-parts/car-body-parts-and-car-exhaust/exhausts/heat-exchanger/?971775581&0&All fitted, happy days. Sent from my Pixel 2 XL using Tapatalk Share this post Link to post Share on other sites