remal 85 Report post Posted July 27, 2015 --at home. I wanted to service the 86 myself (Well my BIL who's a Ex Toyota Mechanic and also my bets mate) who I trust implicitly. So I had the Motul 8100 0w20 oil. HKS Super hybrid filter, OE oil filter. And also had Evans prep fluid and waterless coolant that went in. Took few hours as the prep fluid needed to go in. warm up and air taken out. then cooled down and all done again with the waterless coolant. Well after all was done and the Avo Exhaust was added a week ago I will say it seems to rev a little more freely now. Next mod or change I want is saving up for some Works Emotion wheels in white The one thing I will say is that I'm amazed at the amount of scale that came out of the coolant prep fluid you can re-use. Bare in mind We had drained the original coolant fluid and I did not filter this. In the pics are filter I have to filter the prep fluid. More scale in the engine that in my 5 year old engine in my kit car when I changed to waterless coolant then. Anyone else changed the coolant and found similar ? cheers for reading 1 JamesP1991 reacted to this Share this post Link to post Share on other sites
JamesP1991 222 Report post Posted July 27, 2015 Good stuff Matt! Found the little noise generator silicone join over the weekend, so I will send that out for you tomorrow morning and you will be able to get the intake pipe on too Share this post Link to post Share on other sites
remal 85 Report post Posted July 27, 2015 your a star James many thanks. Hows the turbo; build going on? Share this post Link to post Share on other sites
rob275 1817 Report post Posted July 27, 2015 I had my coolant changed to the Evans also but I can't comment on the state of what came out as Abbey done it Share this post Link to post Share on other sites
JamesP1991 222 Report post Posted July 27, 2015 your a star James many thanks. Hows the turbo; build going on? No problem, it will fit in an envelope so I might just stamp it and send it in the post that way? Will easily fit through your letter box RE turbo kit. Turbo is all plumbed in and running. A revised basemap was sent over from John V after getting a fault code on the first map. Uploaded it and all appears fine for the moment with no faults. Sent over some idle and cruise logs for him to check first before I get the all clear to drive normally again, and then it will be a case of saving a few pennies to pay for some proper custom mapping to be done by either him or Adrian 1 remal reacted to this Share this post Link to post Share on other sites
remal 85 Report post Posted July 27, 2015 once one and look forward to more info. Share this post Link to post Share on other sites