Mark-in-Stoke 488 Report post Posted February 26, 2015 Just in case you were wondering how thick the foam should be here's a quick video LINKY Share this post Link to post Share on other sites
Tareim 343 Report post Posted February 26, 2015 any trick to get it that thick? mine has never been anywhere near that thick and has run off by the time I've got round to the other side of the car Share this post Link to post Share on other sites
Mark-in-Stoke 488 Report post Posted February 26, 2015 I use the magifoam and the lance, just try different setting. Magifoam is very good though. Share this post Link to post Share on other sites
Tareim 343 Report post Posted February 26, 2015 do you fill the bottle up with that or just a little bit and top it off with water? Share this post Link to post Share on other sites
Mark-in-Stoke 488 Report post Posted February 27, 2015 I dilute mine around 1/4 with warm water. Share this post Link to post Share on other sites
Lauren 2259 Report post Posted February 27, 2015 I did mine neat with the snow foam when I tried it for the first time, last weekend, was very thick foam. Share this post Link to post Share on other sites
adam 70 Report post Posted February 27, 2015 I dilute mine 2inches of concentrate and the rest hot water works well for me but it depends greatly on what snow foam you use some lays on thick and clings while others are more liquid based, I have found thats the thinner stuff works really well if yoyr car has been cleaned recently to get very loose debris off the car and the thicker foam works really well if your car has been through lots of wet cycles on dirty roads as it sits on the paint longer Share this post Link to post Share on other sites
Twigman 93 Report post Posted February 27, 2015 I use this: http://www.theultimatefinish.co.uk/snow-foam/ultimate-snow-foam-5-litres.aspx neat in my brass lance with a karcher k series. It foams THICK and stays on for a good 10 minutes if I want it to. Share this post Link to post Share on other sites
