sam534

Gonna need spacers for that poke look you want Sent from my STF-L09 using Tapatalk

Not a sausage. Mind you if I go lower.... don’t know if I would then. Sent from my iPhone using Tapatalk

Yeah bit of a lottery is seams, I have two friends who's NA cars let go. Sent from my STF-L09 using Tapatalk

This is 17x8 et48 with 25mm spacer so effectively et23, dropped about roughly 25mm so only an inch but gives you an idea. 2.1 degrees camber front and 1.7 rear. Sent from my STF-L09 using Tapatalk

Those titanium nuts won't rust at all if they are commercially pure Ti. Are the bolts Ti as well? Otherwise they will get accelerated corrosion from the use of the titanium connected to it. I. E. Galvanic corrosion. Sent from my STF-L09 using Tapatalk

Where are you based? Got a bltiz decat pipe you can have for the stopper plus 50 quid I'm in derby Sent from my STF-L09 using Tapatalk

How much Andrew? Sent from my iPhone using Tapatalk

I've always used a brake bar across the pistons and pressed hard, undo the brake fluid cap first Sent from my STF-L09 using Tapatalk

This is my home town! I live in Derby now, might come down... Sent from my STF-L09 using Tapatalk

Here you go. Sent from my STF-L09 using Tapatalk

Is that under the drivers seat I'm guessing? Same with passengers? Sent from my STF-L09 using Tapatalk

What do you guys do to stop the seat belt chime going off when using the harness and not the standard seat belt? Sent from my STF-L09 using Tapatalk

Very little people if any have had letters, so no they wouldn't have contacted you yet. Sent from my STF-L09 using Tapatalk

Shouldn't be a problem. Sent from my STF-L09 using Tapatalk

Yup, I'd get that trailored to a mechanic Sent from my STF-L09 using Tapatalk

Looks like he cobra decat pipe Sent from my STF-L09 using Tapatalk

Window cleaner works well Sent from my STF-L09 using Tapatalk

Read the code if you can, it's 99.9% a coincidence as a good proportion of members will solely use Vpower. Sent from my STF-L09 using Tapatalk

Should be alright, just don't tear it about. Sent from my STF-L09 using Tapatalk

Right 86ers bit of a story... Misses bought a car 3 years ago 3,500 grand Nissan micra c+c, her first car, she loves it. She trusts her dad with all the maintenance he's quite a proud man and cannot be told a thing. She had an oil leak the other day turns out the filter was leaking, she got it changed, all is good. I asked her when it was last changed, she didn't know, sent me her service history and the last stamp was 9k miles and 2009. Bare in mind it's now done 54k miles. It definetly hasn't been serviced in 3 years, could be 9 worst case! She got hit in the back the other day and the insurance is giving her two options, 1900 quid and the car is written off.... Or 1600 and they don't write it off and the mechanic will repair it for them at a later date.... I'm saying this is a blessing in disguise, that engine can't have much left in it even if you now service it properly. Write it off take the 1900 and get a new car. What does everyone think? It'll be fine just service it now or... Burn it with fire! Sent from my STF-L09 using Tapatalk

They change the oil for the recall anyway. You should effectively get a free service and add the cost of plugs, diff oil and labour for changing diff oil. Sent from my STF-L09 using Tapatalk

Yeah they are, that's how recalls work. Sent from my STF-L09 using Tapatalk

What are you using to measure oil temp? Mine is NA and the oem sensor measured with torque read 90°C stable temp on motorway. However my aftermarket one which is mounted in the sandwich plate reads 84°C, so I know it reads a little lower than the standard. Sent from my STF-L09 using Tapatalk

Pm sent Sent from my STF-L09 using Tapatalk

Interesting to see, thanks Lauren! Sent from my STF-L09 using Tapatalk