Jump to content

sam534

Members
  • Content Count

    405
  • Joined

  • Last visited

Everything posted by sam534

  1. sam534

    Vland sequential rear lights

    Interested in these mate, would need posting though,would that be OK? Sent from my COL-L29 using Tapatalk
  2. sam534

    Car lowered, now front is knocking

    Make sure you detach both sides before you put the links on. Sent from my COL-L29 using Tapatalk
  3. sam534

    Alternative to Focals, Vibe Optisound

    Tweeters and crossovers in place secured with 3m tape.
  4. sam534

    Alternative to Focals, Vibe Optisound

    The tweeters are a bit more complex and using the ct55ty02 the right wire needs to be plugged into the right connection so the woofers get signal. unfortunately the ct55ty02 adapter comes with bayonet fittings whereas my vibe speakers where spade fittings so this was the only thing that wasnt quite plug and play but easily adapted. When plugging in the CT55ty02 there are 4 colour wires on the tweeter plug but unfortunately toyota decided to put them in different orders for left and right. so right side. Red is woofer -ve and white is woofer +ve Green is Headunit -ve and Brown is headunit +ve Left is Green is woofer -ve and Brown is woofer +ve Red is HU -ve and white is HU +ve this makes the plugs as below:- the right two cables are for the signal from the headunit and left two too the woofer. and plugged into the crossover then finally plugged into the tweeter and placed in the dash. the sound is much much better, and some good bass as well, impressed with this little setup and for 170 quid all in very happy and all reversible and plug and play.
  5. sam534

    Will300's Subaru BRZ Build

    The struggle of light coloured wheels Sent from my iPhone using Tapatalk
  6. sam534

    Will300's Subaru BRZ Build

    Ah is that rust fallout appearing when you clean them? Sent from my COL-L29 using Tapatalk
  7. sam534

    Will300's Subaru BRZ Build

    Definitely would make for better pictures [emoji23] Sent from my COL-L29 using Tapatalk
  8. sam534

    Post your GT86 / BRZ pic of day!

    [emoji1690] Sent from my COL-L29 using Tapatalk
  9. Gt86 decat pipe £100, takes out the second cat, no issues with mot or cel at this is after the exhaust sensors. Flanges and hanger in good condition, no cracks, welds in good condition, bit grubby but its a pipe under the car, doesnt need to be shiny. Located in Derby, collection very much prefered. Sent from my COL-L29 using Tapatalk
  10. sam534

    Blitz decat pipe

    Sold Sent from my COL-L29 using Tapatalk
  11. sam534

    Blitz decat pipe

    Can offer postage now Sent from my COL-L29 using Tapatalk
  12. sam534

    GR Yaris who's going for it?

    That's awesome Sent from my COL-L29 using Tapatalk
  13. sam534

    GR Yaris who's going for it?

    I enjoyed the HUD on the supra, I hope to see more performance cars with this option Sent from my COL-L29 using Tapatalk
  14. Clever Sent from my COL-L29 using Tapatalk
  15. sam534

    Brakes seized?

    It's not been around long, but comes recommended from various detailers. Sent from my COL-L29 using Tapatalk
  16. sam534

    Brakes seized?

    Yes, although I'd spray it on as soon as possible so even straight after you wash before you dry Sent from my COL-L29 using Tapatalk
  17. sam534

    Brakes seized?

    Maybe try some bilthamber atom mac next time you suspect that they may stick. Detailer use it to prevent disk rusting after cleaning. When you park up, just liberally spray on the disk surface a caliper. https://www.cleanandshiny.co.uk/products/bilt-hamber-atom-mac Sent from my COL-L29 using Tapatalk
  18. Plugs cost 70-90 that's all you should be paying extra. If you want a clutch that's another 190 ish. Sent from my COL-L29 using Tapatalk
  19. sam534

    GT86 Tyre choice

    How much tracking are you doing? I swap tyres (2 sets of wheels) between ps4 for road and ad08r for track. But I'd run the ad08r most of the year tbh, just not good in heavy rain and have to take it easy. Sent from my COL-L29 using Tapatalk
  20. sam534

    Will300's Subaru BRZ Build

    Will there is a min thickness for standard fronts it's min 22mm and new is 24mm for the rear it's min 16.5 and new is 18mm. Not sure if your BBK or not but check with AP etc what the min thickness is for your discs with the supplier. Measure with a micrometer. Sent from my COL-L29 using Tapatalk
  21. sam534

    Blitz decat pipe

    People have asked this before, I don't have any boxes this shape or size. So no I won't be able to post. Sent from my COL-L29 using Tapatalk
  22. sam534

    Blitz decat pipe

    Hello it is still for sale yes! Sent from my COL-L29 using Tapatalk
  23. Very good point, could be machined depends on the scoring Sent from my iPhone using Tapatalk
  24. Wow yes that's bad, that's 3k in parts? Should be very minimal labour. Sent from my COL-L29 using Tapatalk
×