Newmans 8 Report post Posted April 10, 2016 Having trouble getting standalone logging working on my new tactrix openport cable (flashing and reading work OK). Anybody else using tactrix and able to offer suggestions or show me working solution? Rgds Steve Share this post Link to post Share on other sites
Gringosteve 213 Report post Posted April 10, 2016 I have been looking for someone with a Tactrix in the UK. I can't help with your issue but was wondering how you find it for mapping.. Which maps are you using? Share this post Link to post Share on other sites
Kodename47 446 Report post Posted April 10, 2016 Someone on the US forum said they were having issues with logging believed to be the new firmware update. I assume your using the correct logcfg.txt file? Share this post Link to post Share on other sites
Newmans 8 Report post Posted April 11, 2016 Gringosteve - I applied the A01G STD map first (mine was A00G, dealer said this was the latest but I knew it didn't have DI injector seal fix which bugged me) then applied the OFT STG1 map using romraider to check tables before applying the map. That aspect seems to work fine but documentation is limited so you spend a lot of time looking for info on other websites. You can't switch maps like ecutek but my car is standard so wasn't bothered by that. Quite nerve-racking when you apply the first map but once you've done it you stop worrying! I liked the ecutek solution but software and licence seem expensive when you're only making small gains on a standard car. Rgds Steve 1 Gringosteve reacted to this Share this post Link to post Share on other sites
Newmans 8 Report post Posted April 11, 2016 Knightryder - tried multiple logcfg.txt files from the standard ones downloaded with ecuflash to others located on ft86club. Also two microsd cards. Also stripped down logcfg with just IAM. Also with and without triggers. Also checked logcfg with hex editor. Pretty sure the connection is OK since I can pull the ROM and a cheap ELM327 Bluetooth device works with torque app. I think I'm on latest firmware (limited documentation so hard to be sure) so I'll investigate your comment about the new firmware upgrade. Overall objective was to confirm IAM and MAF scaling for which I need logging - I think. Thanks Steve Share this post Link to post Share on other sites
