86WORX 10 Report post Posted April 24, 2015 Hey everyone! Since we had HUGE interest from our Facebook page about the soon-to-be-released Indicator (brand name) Gauge Faces, we wanted to do a group buy so everyone can benefit from the lowest prices possible at launch. Please read below for more details: Indicator Gauge Faces for Toyota 86, Scion FR-S and Subaru BRZ Indicator is a new brand itself, but it’s made by a very well-known company in Japan that specializes in retro tuning parts for Mazda Roadster (Miata) with 10+ years of experience. They are known for their very high quality and detailed write-ups for installation that makes everyone confident in installing their products. All OEM functions are kept with these gauge faces and it’s available for those with and without digital speedometer, but also in KPH and MPH versions. It’s made in Japan from top quality materials. Pictures Complete Kit (Kit 2): Regular Kit (Kit 1) Video Visit our Facebook page to see the video of these gauge faces in action! Installation Plug and play! No modification or wiring needed. Pricing Now, let’s talk about one of the most important point, the pricing. It’s very high end product and it’s aimed for the enthusiasts who want the best in their cars. When we compare to other JDM products (gauge faces), they actually are very competitive in pricing. Kit 1 : Gauge Faces + Gauge Rings + Needle Caps (Photo) Retail Price: $399.99 + shipping Price for 1-5 sets (Kit 1 + Kit 2): $374.99 + shipping Price for 5-10 sets (Kit 1 + Kit 2): $359.99 + shipping Price for 11+ sets (Kit 1 + Kit 2): $349.99 & FREE SHIPPING WORLDWIDE Pay your deposit here. Kit 2 : Gauge Faces + Metal Panel (around gauge faces) + Gauge Rings + Needle Caps (Photo) Retail Price: $699.99 + shipping Price for 1-5 sets (Kit 1 + Kit 2): $674.99 + shipping Price for 5-10 sets (Kit 1 + Kit 2): $659.99 + shipping Price for 11+ sets (Kit 1 + Kit 2): $599.99 & FREE SHIPPING WORLDWIDE Pay your deposit here. Shipping All orders will start shipping at the end of May. If the “Free Shipping” level is not reached, expect around ~$15-$20 shipping via EMS tracked mail. About 86WORX We’re in business since November 2013, we have many satisfied customers all over the world and we did a group buy on Intec Tail Lights in the past that went pretty smoothly. We’re also sister company of REV9 Autosport which is in business since 2007, so you can trust our business with thousands of satisfied customers. Share this post Link to post Share on other sites
rob275 1817 Report post Posted April 24, 2015 can't work out if i like them or not Share this post Link to post Share on other sites
GTB 53 Report post Posted April 25, 2015 Shame kit 2 does not lose the analogue speedo which is a waste of dash space. Could be tempted on kit 2 but would like to see detailed installation instructions. Share this post Link to post Share on other sites
smudge 1020 Report post Posted April 25, 2015 Ewww. Looks like something out of Max Power magazine Share this post Link to post Share on other sites
86WORX 10 Report post Posted April 29, 2015 Shame kit 2 does not lose the analogue speedo which is a waste of dash space. Could be tempted on kit 2 but would like to see detailed installation instructions. Ask and you shall be served <Installation Instruction Outline> (see pictures on PDF here : http://86worx.com/Indicator_Instructions.pdf) When you disclose this outline, please mention about the following notice. This describes the installation procedure roughly. On the formal installation manual, that is enclosed with the product, more detailed explanation is written without omitting any procedure, differently from this outline. The procedures such as how to remove the meter unit from the vehicle, how to disassemble the meter unit, how to remove the needles, how to set the gauge faces, and how to reset and adjust the needle, are explained with the drawings on the formal installation manual. As for the procedures that are important or hard to understand just from the installation manual, we are planning to make a video. It takes approximately 90 minutes to complete the installation if you follow the formal installation manual that is enclosed with the product. The number of the following outline is corresponding to the photo number. 01. Remove the surrounding panel of the liquid crystal monitor. 02. It will be pulled out just by inserting a spatula into the slit. 03. Unscrew a bolt and detach the meter hood. 04. Remove the connector from the back of the meter unit, and detach the meter unit from the vehicle. The following procedure is possible on the desk inside the house. 05. Remove the clear acrylic cover. 06. Remove the black resin bezel. 07. Remove all the needles. The clue of removing the needles will be described in the formal installation manual. 08. Remove the genuine gauge panel. 09. Install “illumination diffuser panel”, that is enclosed with the product. 10. Install the gauge panel of Indicator. 11. Install the metal panel. If you install the needle caps, do it at the same time in this procedure. 12. Return all the needles. How to adjust the needles is explained in the formal installation manual in detail. 13. Return the black resin bezel. If you install the metal rings, do it at the same time in this procedure. 14. Return the clear acrylic cover and go back to the vehicle. 15. Return the meter unit in the reverse procedure from 04 to 01.Return the meter unit in the reverse procedure from 04 to 01. Share this post Link to post Share on other sites
86WORX 10 Report post Posted April 30, 2015 Group buy list : 1. Jordan B. 2. Sylvain A. 3. 4. 5. 6. 7. 8. 9. 10. 11. Share this post Link to post Share on other sites
86WORX 10 Report post Posted May 25, 2015 Group buy list : 1. Jordan B. 2. Sylvain A. 3. Alex J. 4. 5. 6. 7. 8. 9. 10. 11. Share this post Link to post Share on other sites
86WORX 10 Report post Posted May 27, 2015 Group buy list : 1. Jordan B. 2. Sylvain A. 3. Alex J. 4. Tony D. 5. 6. 7. 8. 9. 10. 11. Share this post Link to post Share on other sites