Guest Report post Posted October 23, 2014 I am looking for some pictorial help please. I would like to know the routing of all the different kits inter cooler pipe work between the engine bay and the inter cooler. As some of you will know, I'm playing with the bumper reinforcement structure, and want to make sure I don't get in the way of any future kit purchases. Share this post Link to post Share on other sites
Kodename47 446 Report post Posted October 24, 2014 Best to check the american forum and look in the FI section. It might be worth having an idea of which kit you favour as turbo/SC placement will have an impact on the routing. Share this post Link to post Share on other sites
rob275 1817 Report post Posted October 24, 2014 I think Steve is right, you're going to struggle to cater for every kit, I'd say look in to what route you want to take first and look at placement that way. Share this post Link to post Share on other sites
Guest Report post Posted October 24, 2014 Thanks for that guys. I had completely forgotten about the FI forum on the FRS site. It's there that I found a picture of the Crawford set up, with NO bumper support whatsoever!! God only knows how you'd dtand with an insurance claim with nothing there. If I do go the 45mm tubing route, I should have more clearance than standard? Share this post Link to post Share on other sites