Jump to content

The Minion

Members
  • Content Count

    112
  • Joined

  • Last visited

  • Days Won

    7

Posts posted by The Minion


  1. No need to reach across to unlock passenger door! Just press the button on  inside of driver's door as you get in. You can also put in a code on keypad in glovebox that unlocks both doors, instructions on forum somewhere.

    I had full size key cut by independent, he did say he hadn't got one with the hole in!!! I explained it was only there to latch original small key into fob.

    He also checked for a transponder for coding, doesn't have one!!


  2. I think the glass runner has gone past the sensor. I was washing the car and pressed the aforementioned button on door frame whilst door open. The window went up, as I would expect, but half an inch too far. The reason I pressed the button was because I had a problem before where the window wouldn't rise and fall when door opened and closed, found that the button was loose. This was also because internals had been removed for paint spray work. The paint wasn't quite right so hence going back in.


  3. Passenger window closing too high, not opening slightly when opening and closing door.
    If I open window fully and then 'one shot' it the window goes right up and then about two thirds down.
    I have tried the obstruction reset but makes no difference.
    I have just had a bit of work done on this door which would have involved internal removal.
    Any ideas or is it a trip to Toyota?

×