GT1986

Hi all. Seen a few threads but none really answered with the sort of direct answer I was hoping to read. Is it pretty common practice to remove the sound generator after a new exhaust / manifold? Wondering how many do this and after thoughts from those that have. I'm pretty sure I can no longer hear mine over the other sounds of the car now following the work but if it helps with quieting road noise and vibration down etc that will be a big plus. Tried the old cigarette plug trick but can't say made any difference so wondering if full removal actually makes any difference at all to cabin noise? Thanks. Gary

Due to selling the car, the final part to now be listed is my smoked valenti V2 sequential tail lights. Lights are in good condition and fully functional, There is light superficial scratch marks that can be seen when you hold them under direct light from where they have been cleaned during a car and wash but no scratch marks that are deep or damaging or visible in daily use. Have been on the car approx 8 - 9 months. £215 posted. Item location Lowestoft.

Sold

For sale is my Cobra UEL Manifold, this has been fitted on the car for approx 5 months. I am returning the car to stock in prep for sale so that is the only reason for removal. Manifold brought from and installed and removed by the guys at Fensport. Small scuff mark where it originally rubbed on engine shield before being given some clearance and this is shown in one of the photographs. £400 Buyer to arrange courier or collection. Item location is Lowestoft, Suffolk.

Provisionally sold.

Hello, Yes still currently available

GT86 - 2016 D-4S For sale. 2 previous owners. Gorgeous Pearlescent white. Full service History - Last service and MOT completed at Toyota Feb 2019. Toyota warranty until April 2021 - (Clutch release bearing recently replaced under warranty.) 27,000 miles but will increase slightly. Satellite Navigation. Lovely condition inside and out. Subtle upgrades - Michelin PS4 tyres fitted all round. Cobra Resonated sports Catback exhaust. Smoked Valenti Sequential tail lights. (Stock taillights can be supplied). Please ask any questions. Just for information I work offshore on a 2/2 rotation so viewing wont be immediately available if I'm offshore when contacted. £16,000. Car Location Lowestoft, Suffolk. Limited on picture upload so more can be supplied or see Autotrader Advert.

Dropped to £380.

For sale XTRONS headunit that fits the GT86. Model PB78HGTP Box and manual included. Has been fitted on the vehicle for about 9 months. £140 plus P&P if not collected. Item location, Lowestoft,Suffolk. Now SOLD. Please close thread admin.

I ordered mine from this seller, heads up incase you aren't aware the import charge isn't included, was about another £30 if i remember.

Not currently for sale.

Hi all , I'm considering selling my GT86. Guess I'm after abit of a advice if I'm going to be pricing right. 2016 GT86, Pearlescent white, FSH, 12 months MOT, very good condition, 28,000 miles. Sat nav. 2 year Toyota warranty still in place. Mods- Cobra decat manifold, cobra resonated exhaust, ECUTEK remap ( all work performed by fensport with invoices). Smoked valenti sequential tail lights, xtrons head unit and focal speaker upgrade. Also Supplied with the car will be stock manifold, stock tail lights and stock head unit should anyone want to revert. I Was going to be pricing around £17,000?

Thanks for the replies. I've listed the car as is for now and see what the feelers are like. Matrixprotein I will give you a shout if I do resort to stock with regards to the tail lights.

I took my car in for service and mot yesterday. I asked them to advise on a noise coming from the clutch when depressed. They have advised they actually suspect it to be the release bearing, which would be covered under warranty, however they also said if they strip it down and it's not that and does end up being something else I'll get stuck with a £550 Bill. Anyone had issue with their release bearing? Mine is 2016 plate.

Yes it's squeaking when depressed, the technicians actually comments on the form were " squeaking noise inside bell housing, suspect release bearing". Thanks Mike, might give that a go.

I'm surprised they said the release bearing as it's not a rattle, it's more of a whoosy squeak on depression. Think I'll just monitor for now as don't particularly want to "possibly" part with £550 for no reason and it's still got a fair bit of warranty left at the minute.

Will find out on Wednesday 🙈 Will find out on Wednesday 🙈

Hello, Its my daily, dont own another car. 👍

It's the cobra catless UEL manifold and Cobra resonated catback. Will find out how I do on emissions on the MOT next month once it's back from having bumper resprayed due to someone driving into me. Thought I'd post the video as this offshift it will be at the spray shop so won't be able to meet just yet.

Finally got round to taking a short clip if it's of use George. Video_20190106_100756.mp4

Has anyone tried this? Curious as my first MOT is coming up shortly. I've started using 95 RON map a bit more often on short drives around town due to the reduced throttle response and car seems quieter which can be a pro at times. I assume this Map is just pretty much how the car would be standard before all the tinkering and I'm not doing any harm using this Map? Or am I miles off on my understanding?🙈🙈

Now Provisionally sold.

Carbon Look wing mirror covers for sale.. Brought from Fensport in July this year, Paid £105. Asking £50, will need small bit of 3M tape replacing as have been used. Postage included in price.

Carbon fibre Side vent covers for sale. Paid £215 in July from Fensport, cheapest seen on eBay about £190 still, and £220ish from Fensport and Amber. Will require a clean up underneath and 3m Tape replaced as have been used. Only Mark on front worth mentioning is a mark on RH wing (photographed). Dried glue which will probably come off with some white spirit but haven't tried as don't have any. £100 includes postage.