-
Content Count
412 -
Joined
-
Last visited
Posts posted by sam534
-
-
Gonna need spacers for that poke look you want
Sent from my STF-L09 using Tapatalk -
Not a sausage. Mind you if I go lower.... don’t know if I would then.
Sent from my iPhone using Tapatalk -
Yeah bit of a lottery is seams, I have two friends who's NA cars let go.
Sent from my STF-L09 using Tapatalk -
This is 17x8 et48 with 25mm spacer so effectively et23, dropped about roughly 25mm so only an inch but gives you an idea. 2.1 degrees camber front and 1.7 rear.
Sent from my STF-L09 using TapatalkSwinginking reacted to this -
Those titanium nuts won't rust at all if they are commercially pure Ti. Are the bolts Ti as well? Otherwise they will get accelerated corrosion from the use of the titanium connected to it. I. E. Galvanic corrosion.
Sent from my STF-L09 using Tapatalk
-
Where are you based? Got a bltiz decat pipe you can have for the stopper plus 50 quid I'm in derby
Sent from my STF-L09 using Tapatalk -
Just a heads up, had two of these in. One sold, one up for grabs if anyone's interested.
How much Andrew?
Sent from my iPhone using Tapatalk -
I've always used a brake bar across the pistons and pressed hard, undo the brake fluid cap first
Sent from my STF-L09 using Tapatalk -
This is my home town! I live in Derby now, might come down...
Sent from my STF-L09 using TapatalkVAD17 reacted to this -
Here you go.
Sent from my STF-L09 using Tapatalk -
Is that under the drivers seat I'm guessing?The cheapest way is just to disconnect the wiring connector going to the seat belt receiver! I used one of these plugs until I realised.
Same with passengers?
Sent from my STF-L09 using Tapatalk
-
What do you guys do to stop the seat belt chime going off when using the harness and not the standard seat belt?
Sent from my STF-L09 using Tapatalk -
Very little people if any have had letters, so no they wouldn't have contacted you yet.
Sent from my STF-L09 using Tapatalk -
Shouldn't be a problem.
Sent from my STF-L09 using Tapatalk -
Yup, I'd get that trailored to a mechanic
Sent from my STF-L09 using Tapatalk -
-
Window cleaner works well
Sent from my STF-L09 using Tapatalk -
Read the code if you can, it's 99.9% a coincidence as a good proportion of members will solely use Vpower.
Sent from my STF-L09 using Tapatalk -
Should be alright, just don't tear it about.
Sent from my STF-L09 using Tapatalk -
They change the oil for the recall anyway. You should effectively get a free service and add the cost of plugs, diff oil and labour for changing diff oil.
Sent from my STF-L09 using Tapatalk -
Yeah they are, that's how recalls work.
Sent from my STF-L09 using Tapatalk -
What are you using to measure oil temp? Mine is NA and the oem sensor measured with torque read 90°C stable temp on motorway. However my aftermarket one which is mounted in the sandwich plate reads 84°C, so I know it reads a little lower than the standard.
Sent from my STF-L09 using Tapatalk
-
Pm sent
Sent from my STF-L09 using Tapatalk -
Deacons '86
in Projects & Builds
Posted · Report reply
You daily driving them?
Sent from my COL-L29 using Tapatalk