Jump to content
Gt86ben

PLEASE HELP!!

Recommended Posts

Recently been getting a small amount of smoke/steam out the engine bay after I’ve been driving for long periods of time or at high speeds. I’ve had a look under the bonnet to find a very small amount of oil leaking onto the exhaust. Just need someone who has more knowledge than me to identify what could be wrong, I’ve found where exactly it’s coming from but have no idea of what I’d need to order to fix the problem? I’ve put my hand underneath to find where the oil is, if someone could please shine some light on what I’m dealing with and what part I need to order I would be very grateful, thank you very much in advance👍🏻 
 

vehicle is RHD, the same side as the leak.

79253B62-032D-4328-9913-654FB585E69D.jpeg

05513E10-B09C-4C44-B5F5-998411B4380B.jpeg

D46DECC6-A08B-4861-BF70-80B25D34D4DA.jpeg

Share this post


Link to post
Share on other sites

Most likely it the cam plate, it's not a serious issue and is quite common.

There are a couple of options, remove the existing plate and reseal it or buy a replacement with an upgraded o-ring seal. Upgrade is probably a better option.

Couple of upgrade options:

https://www.fensport.co.uk/collections/toyota-gt86-2012-to-2016/products/racer-x-cam-blanking-plate-black-gt86-brz 

https://www.sumopower.com/Brands/TORQUE-SOLUTION/Torque-Solution-Billet-Aluminum-Cam-Plate-Black-Subaru-BR-TS-CAM-PLTB

Share this post


Link to post
Share on other sites
5 minutes ago, will300 said:

Most likely it the cam plate, it's not a serious issue and is quite common.

There are a couple of options, remove the existing plate and reseal it or buy a replacement with an upgraded o-ring seal. Upgrade is probably a better option.

Couple of upgrade options:

https://www.fensport.co.uk/collections/toyota-gt86-2012-to-2016/products/racer-x-cam-blanking-plate-black-gt86-brz 

https://www.sumopower.com/Brands/TORQUE-SOLUTION/Torque-Solution-Billet-Aluminum-Cam-Plate-Black-Subaru-BR-TS-CAM-PLTB

Cheers mate! I tried looking through a few different forums earlier to find the problem and I seen cam plate mentioned a few times but all the photos that were being posted looked completely different, I’ll give it a try and hope for the best👍🏻 Appreciate your help, Thankyou!

Share this post


Link to post
Share on other sites
Just now, sam534 said:

In that case they don't have the can plate which is why as you say the pictures look different....

Sent from my COL-L29 using Tapatalk
 

Any idea what I need to order ínstela mate? Useless with this stuff😂

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×