Daninplymouth 61 Report post Posted October 19, 2019 Hi, I was looking to tidy up the outside of my car a bit, so was planning on a 3/4 front plate and the American import for the rear. My question is I have just removed the plastic frame and been left with the holes below. Is there any reason not to drill the plate and screw straight to the fixing washers already fitted? Also can the big black piece of plastic running along the top be removed? Just noticed the facelift has a different surround 🤦🏼♂️ Share this post Link to post Share on other sites
KevinA 695 Report post Posted October 20, 2019 That is what I did with no problems at all, I just put some gaffer tape on the back of number plate so as not to rub the paint on my bumper. Share this post Link to post Share on other sites
bavis 0 Report post Posted November 2, 2019 I found company on ebay who made me numbers onto laminated paper any size I specified, I then used a sheet of Perspex(used an old picture frame that had Perspex instead of glass,double sided tape to fix it,then double sided 3m tape to stick it on front of car,it is the wide enough to cover the large holes(bit less then 3/4,been on for months,no problems,have not been pulled over by the police,just remember to have OEM size plate in the boot to show anyone Clive Share this post Link to post Share on other sites