GT 86 rear parking camera kit

[Chung86 0]

Hi all,

im selling rear parking camera kit for factory headunit.

will fit all year GT86

The Kit comes with 16/ 28 pin comnector with RCA, camera extension wire, square ( fit on boot )or round camera ( fit on bumper ) .

price is :

£120 fitted to your car in my workshop in Birmingham.

or

£65 posted to you 

any question please ask

thank you

 

 

 

[vanko25 70]

Can we see some photos of the kit please? 

[Chung86 0]

this is how the image will comes up on the HU.

the actual kit i will get a photo for you asap. 

its comes with connectors for the back of the factory HU, camera and extension wire.

[smudge 1020]

Can it be fitted to any HU? 

[Chung86 0]

On 10/27/2019 at 6:09 PM, smudge said:

Can it be fitted to any HU? 

i can do it to most of the toyota factory HU

[Faizaan 4]

Have you got a kit for the 2017 oem brz headunit?

[mick200 2]

8 hours ago, Faizaan said:

Have you got a kit for the 2017 oem brz headunit?

I'm looking for one as well ?

[Chung86 0]

On 11/9/2019 at 4:33 AM, Faizaan said:

Have you got a kit for the 2017 oem brz headunit?

yes . in stock 

[Faizaan 4]

yes . in stock 

Brilliant, keep one aside for me if you can, currently out of the country

 

[Xyra 8]

Have you got a photo of using it at night? Very interested.... not local to Birmingham, how straightforward is it to fit yourself?

[DevilsCry 11]

I have some feedback which might be useful for the people above or anyone else that is interested. Stupidly I forgot to make a picture of the kit lying on my table, but basically this image will show you exactly what you will get, including the terrible manual which does not help. There is an av/extender included where you can connect the two cables to. The top right cable connects to the camera, goes through the car back to front, which connects to the bottom cable. The red wire gets the power from the headunit. The holedrill that comes with it is too small for the camera, so be prepared to sand quite a bit more off to make it fit.

I used a dremel to create a little notch in the back for the cable to sit in, so you get a better viewing angle (you can see on the last image why)

It is hard to see what is up or down on the little camera so don't start taping and bolting everything down before it is aligned.

Once it's installed it looks very discreet and snug. there is a little indent at one of the sides as you can see, hence I made the notch in the back so you can actually move the camera that far in.

I used this youtube video to get me through the installation of it all: https://www.youtube.com/watch?v=daiDH2v4wUg

It is my first time doing such an install and with trial and error (and using the dremel afterwards to increase the viewing angle) it took me around 3 hours to complete.

[Badger 63]

Do you have a picture of the camera image having angled the unit?

Sent from my LYA-L29 using Tapatalk

[DevilsCry 11]

9 hours ago, Badger said:

Do you have a picture of the camera image having angled the unit?

Sent from my LYA-L29 using Tapatalk
 

Apologies if they are large, am doing this from my mobile.

[Badger 63]

Apologies if they are large, am doing this from my mobile.

Thank you. Have a similar camera on mine but it pretty much only shows the back bumper. Might have to try this when the weather improves

Sent from my LYA-L29 using Tapatalk