Gray 28 Report post Posted May 13, 2019 Are they still bad for welds after the flexi joint upgrade? Seem to recall a post where Lauren had 4 in 4 years but not sure if pre or post upgrade. Like the sound and assume a non res on a stock motor would come in at sensible db for trackdays Share this post Link to post Share on other sites
Lauren 2259 Report post Posted May 14, 2019 Non-res on a stock car is no problem at all for track days even with a second decat. They sound great but I wouldn't have another due to the poor welding. I got bored by the fourth one and went for a TD exhaust instead, mainly because it doesn't crack. 1 Mike@TD.co.uk reacted to this Share this post Link to post Share on other sites
86iain 44 Report post Posted May 14, 2019 I'm having a non res Milltek fitted tomorrow! 1 Lauren reacted to this Share this post Link to post Share on other sites
Varelco 211 Report post Posted May 14, 2019 They are still known to fail even with the flexi joint. There are so many other options available for this chassis, don't know why so many still get fitted. Share this post Link to post Share on other sites
Mike@TD.co.uk 467 Report post Posted May 14, 2019 We have removed a number of these recently due to failure unfortunately. The flexi section doesn't appear to improve the reliability of this particular system from what we have seen here. Thanks Mike Share this post Link to post Share on other sites
Gray 28 Report post Posted May 14, 2019 Thanks to all of you for the replies and info. Will give the Miltek a miss, shame as I really liked the sound. Share this post Link to post Share on other sites
GT86Curn 8 Report post Posted May 15, 2019 My non res sounded great on a standard manifold and cat. Like others though on inspection it was cracked and even sagging as one of the hangers on the back box was failing. I highly recommend going elsewhere. There are plenty of other options. I have the TD system and its a great bit of kit. Very well priced too. 1 Mike@TD.co.uk reacted to this Share this post Link to post Share on other sites
JohnM 25 Report post Posted May 15, 2019 Has anybody got any sound clips of a non resonated pipe fitted to a completely stock setup please with either the 2nd cat in place or removed. Thanks. Share this post Link to post Share on other sites