willclarke 50 Report post Posted April 8, 2019 Got the 25 / 20 japspeed Spacers, having cross threading issues with the standard wheel nuts. Has anyone else had this, or know if you can 're-thread' the spacer studs? Collecting some new wheel nuts tomorrow as a result Sent from my Pixel 3 XL using Tapatalk Share this post Link to post Share on other sites
vanko25 70 Report post Posted April 8, 2019 Is that on aftermarket wheels or stock? Share this post Link to post Share on other sites
nikndel 509 Report post Posted April 8, 2019 Are they the right pitch? Share this post Link to post Share on other sites
willclarke 50 Report post Posted April 8, 2019 Stock wheelsSent from my Pixel 3 XL using Tapatalk Share this post Link to post Share on other sites
vanko25 70 Report post Posted April 8, 2019 Unusual. Let me know how it goes. I was planning buying these for mine before Japfest. Share this post Link to post Share on other sites
willclarke 50 Report post Posted April 8, 2019 Are they the right pitch?Yeah other wheel nuts have been bit tight to get on and tighten properly, but haven't cross threaded, just a few spacer studs aren't accepting the stock wheel nuts. It's like they're only just slightly off / badly machined. I'll try the new wheel nuts from Toyota tomorrow, otherwise might try contacting japspeed and exchanging themCheersSent from my Pixel 3 XL using Tapatalk Share this post Link to post Share on other sites
Ulphy86 9 Report post Posted April 9, 2019 Amber fitted some 30mm ones to mine a few weeks ago, they hadn't mentioned there were any issues with them. Share this post Link to post Share on other sites
willclarke 50 Report post Posted April 9, 2019 Got some replacement wheel nuts today and all good! Couple of the old ones must've been a bit worn. Great improvement Sent from my Pixel 3 XL using Tapatalk 2 sam534 and vanko25 reacted to this Share this post Link to post Share on other sites