Falix 22 Report post Posted March 30, 2017 A pretty easy job, i was just frustrated with all the guides being LHD! So, first, you need: 1x Phillips head Screwdriver 1x medium Flathead Screwdriver 1x tiny flathead screwdriver A light First remove the side pannel, drivers side, by inserting a flathead, push up to pop the clip. Carefully pull the panel off by hand note where all the clips are. Undo the lower Phillips screw. Now carefully pull off the panel with your dimmer switch in, lots of retaining clips, see pictures, use two hands. Now, using the light you should be able to see the relay on the right hand side of the column, it's Grey and has FLASHER on it! (Little box top Left of 3rd pic) You can try to get the relay out of the white retaining clip, using the tiny flat head, the barb is rear facing, OR just pull the whole thing down, relay and clip. Once the relay is free, unclip the loom, white tab up top on the relay. Clip in your new relay. Clip relay back into holder/holder back into car. Re install plastics carefully! Don't forget the screw! Reference LHD video: 4:30 onwards, you don't need all the lower panel down! 2 vanko25 and rob275 reacted to this Share this post Link to post Share on other sites
vanko25 70 Report post Posted March 31, 2017 It was me that commented on your post on FB yesterday. Got what you meant now. Will be fixing mine soon! Share this post Link to post Share on other sites
Kodename47 446 Report post Posted March 31, 2017 15 hours ago, Falix said: A pretty easy job, i was just frustrated with all the guides being LHD! Are there any differences? I looked at a LHD video and then did it, I could cope with the steering wheel on the opposite side...... In fact the 2nd time I did it, I didn't even remove the panels. Share this post Link to post Share on other sites
KevinA 695 Report post Posted March 31, 2017 Did mine with panels on, but hands suffered lol Share this post Link to post Share on other sites
Falix 22 Report post Posted April 1, 2017 21 hours ago, knightryder said: Are there any differences? I looked at a LHD video and then did it, I could cope with the steering wheel on the opposite side...... In fact the 2nd time I did it, I didn't even remove the panels. Just wanted to see where the clips where so as not to break the plastics, hence the pics! Got a habit of snapping stuff 😂 But yeah, an easy job! Share this post Link to post Share on other sites
ThatGuyThere 54 Report post Posted April 1, 2017 What does this mod do? Share this post Link to post Share on other sites
Kodename47 446 Report post Posted April 1, 2017 8 minutes ago, Adamd said: What does this mod do? For those with LED lights. I actually modded my OEM relay as most aftermarket relays have a longer 1st flash, hence replacing it twice. Share this post Link to post Share on other sites
Falix 22 Report post Posted May 2, 2017 On 4/1/2017 at 11:04 PM, Adamd said: What does this mod do? tap-to-turn was what I did it for, 4 flashes with a flick of the stalk, my 10 year old van has this the going home lights are nice too. The relay died after a few days so i've gotta do this all over again soon with its replacement. Share this post Link to post Share on other sites
