Tarmac 58 Report post Posted October 5, 2016 Hi All We currently have 4 sets of front lips and side diffusers on offer at just £200. Made of high grade polyurethane so won't shatter on impact Share this post Link to post Share on other sites
Paul 442 Report post Posted October 5, 2016 Self-fitting? Share this post Link to post Share on other sites
S18 RSG 429 Report post Posted October 5, 2016 49 minutes ago, Paul said: Self-fitting? Yes, fairly easy to do. Either drill and screw in (which I did) or 3M/strong glue. Would recommend screwing though. Share this post Link to post Share on other sites
TTR 509 Report post Posted October 5, 2016 24 minutes ago, S18 RSG said: Yes, fairly easy to do. Either drill and screw in (which I did) or 3M/strong glue. Would recommend screwing though. There's a double entendre in there somewhere Share this post Link to post Share on other sites
Paul 442 Report post Posted October 6, 2016 Drill? As in, into the car?! Share this post Link to post Share on other sites
S18 RSG 429 Report post Posted October 6, 2016 7 minutes ago, Paul said: Drill? As in, into the car?! Well, I guess you could try drilling into the floor, but I don't know what you'd gain from that :/ Sorry 2 TTR and Mike reacted to this Share this post Link to post Share on other sites
Paul 442 Report post Posted October 6, 2016 Just now, S18 RSG said: Well, I guess you could try drilling into the floor, but I don't know what you'd gain from that :/ Sorry Sarcastic post gets sarcastic reply, who knew? 1 TTR reacted to this Share this post Link to post Share on other sites
S18 RSG 429 Report post Posted October 6, 2016 Sarcasm is my go to response when I'm unsure whether I'm responding to sarcasm or genuine confusion. It covers all basis. Anyway, I think we've talked enough about screwing our cars. 1 TTR reacted to this Share this post Link to post Share on other sites
Paul 442 Report post Posted October 6, 2016 11 minutes ago, S18 RSG said: Anyway, I think we've talked enough about screwing our cars. 1 TTR reacted to this Share this post Link to post Share on other sites
smudge 1020 Report post Posted October 6, 2016 Paul I have these on my car. Front lip just screws into the bumper I used Tiger Seal for the skirts and they're starting to come apart after nearly 2 years so I'll be getting a new set and using the screws provided with some form of sealant around the holes Share this post Link to post Share on other sites
Sleazyboii 2 Report post Posted June 8, 2019 Good afternoon, sorry to bring up an old thread but, is the front lip still purchasable anywhere? I know this was 3 years ago... It's exactly what I'm after. Share this post Link to post Share on other sites
Beney86 10 Report post Posted June 8, 2019 https://www.htautos.co.uk/ They sell the same lip kit @Sleazyboii Share this post Link to post Share on other sites
Sleazyboii 2 Report post Posted June 9, 2019 The side lips are the same as the HT Autos ones however I see a few differences with the front lips. The one above appears to have cut outs/indentations which appear to align with the front bumper better. @Exysen Share this post Link to post Share on other sites
JohnM 25 Report post Posted June 10, 2019 https://www.maxtondesign.co.uk/front-splitter-toyota-gt86?search=toyota gt86 I have this one on mine Share this post Link to post Share on other sites
Sleazyboii 2 Report post Posted June 10, 2019 I was at Jap show yesterday and saw a gt86 with the Maxton lip, the pictures dont do it justice, it looks way better in person. However I'm after that tight fit and mould around the front bumper. The one above appears to wrap around the bumper alot more compared to anything else I've seen. I mean it more so when you look at the car side on, it meets the curve of the bottom of the bumper especially in the centre indentation. I don't think I'm going mad. Share this post Link to post Share on other sites
Beney86 10 Report post Posted June 10, 2019 17 hours ago, Sleazyboii said: The side lips are the same as the HT Autos ones however I see a few differences with the front lips. The one above appears to have cut outs/indentations which appear to align with the front bumper better. @Exysen Here is a picture of my Htauto installed @Sleazyboii I think they are identical honestly. it might just be the angle of picture from the top view of picture above Share this post Link to post Share on other sites
JohnM 25 Report post Posted June 10, 2019 Looking at the HTauto one they are different at the front especially in the middle section of the bumper. It looks more fitted and shaped to the OEM bumper than the maxton design one. Share this post Link to post Share on other sites
Sleazyboii 2 Report post Posted June 11, 2019 20 hours ago, Exysen said: Here is a picture of my Htauto installed @Sleazyboii I think they are identical honestly. it might just be the angle of picture from the top view of picture above Looking at your one (which looks wicked btw) it does look like it may be the angle above. I think I'll be investing into one next pay day. Thanks for the advice and photos. Share this post Link to post Share on other sites