adamj29 133 Report post Posted August 17, 2015 I'm selling my 2.5" exhaust system and manifold as I've just had to upgrade to a 3" system. This exhaust & manifold was custom made for my GT86 by Alunox Exhaust Systems. The exhaust is second CAT delete and high flow CAT primary, and has the coned tips. Exhaust & manifold has had roughly 7,000 miles use and been on the car for around 10 Months. Great sound to it, fairly loud but the manifold gives it a lovely rasp noise. The exhaust was £780 new and the manifold was £1,140 But I have no use for them now so asking £900 for the lot. (Collection only - from Wrexham) The exhaust is in too parts as It has to be cut to transport back from Fensport so will need fitting by a garage I assume. Pictures: Any questions please ask away Share this post Link to post Share on other sites
adamj29 133 Report post Posted August 20, 2015 Bump - Open to sensible offers Share this post Link to post Share on other sites
adamj29 133 Report post Posted September 1, 2015 Bump - Please not everyone at once, I'm struggling to keep up... Offers welcome. Need the space!! Share this post Link to post Share on other sites
adamj29 133 Report post Posted September 14, 2015 BUMP..Anyone? It will be going on Ebay otherwise Share this post Link to post Share on other sites
smudge 1020 Report post Posted October 2, 2015 The manifold is EL I assume? Share this post Link to post Share on other sites
adamj29 133 Report post Posted October 8, 2015 The manifold is EL I assume?Hi mate, yes it is has equal length headers. Primary dia 1" 5/8thsThe exhaust spec:200 Cell high flow cat converter2.5" silencer system2.5" 200 Cell Exhaust systemAll exhaust system on V band clampsSome more picture to follow Share this post Link to post Share on other sites
adamj29 133 Report post Posted October 8, 2015 Again offers welcome Share this post Link to post Share on other sites
Jamie_GRMN 177 Report post Posted October 8, 2015 This is a very lovely sounding exhaust, I'd have had it off you Adam if I didn't already have one... 1 adamj29 reacted to this Share this post Link to post Share on other sites
adamj29 133 Report post Posted October 8, 2015 Cheers Jamie, gutted I had to swap it. Someone will end up with a cracking deal... hopefully lol Share this post Link to post Share on other sites
Adamb 10 Report post Posted November 5, 2015 Any videos of the sound? Share this post Link to post Share on other sites
adamj29 133 Report post Posted November 5, 2015 Any videos of the sound? https://youtu.be/lbCAW3JPRpsThis shows a quick drive by. This is before the manifold was put on. Manifold gives it more of a grunt and a tad louder. Hope this helps. Share this post Link to post Share on other sites
adamj29 133 Report post Posted November 6, 2015 https://youtu.be/lbCAW3JPRpsThis shows a quick drive by. This is before the manifold was put on. Manifold gives it more of a grunt and a tad louder. Hope this helps.Sorry correction... This was after the manifold was installed.. Share this post Link to post Share on other sites
Adamb 10 Report post Posted November 6, 2015 Sent you a pm adamj Share this post Link to post Share on other sites
adamj29 133 Report post Posted November 26, 2015 Bump... Still for sale. Going to put it on ebay this weekend, but I would rather sell it on here.. Share this post Link to post Share on other sites
Gringosteve 213 Report post Posted November 26, 2015 Has it been physically cut and so will need welding? Have you passed an MOT with it? Share this post Link to post Share on other sites
smudge 1020 Report post Posted November 26, 2015 7 minutes ago, Gringosteve said: Has it been physically cut and so will need welding? Have you passed an MOT with it? Why would it have been cut? Share this post Link to post Share on other sites
Gringosteve 213 Report post Posted November 26, 2015 The exhaust is in too parts as It has to be cut to transport back from Fensport so will need fitting by a garage I assume. Share this post Link to post Share on other sites
smudge 1020 Report post Posted November 26, 2015 15 minutes ago, Gringosteve said: My bad! Carry on... 2 Gringosteve and adamj29 reacted to this Share this post Link to post Share on other sites
adamj29 133 Report post Posted November 26, 2015 1 hour ago, Gringosteve said: Has it been physically cut and so will need welding? Have you passed an MOT with it? If you look on the last picture where it shows the jubilee clip, where it separates, this is it has been cut. I will ask Dan at Fensport tomorrow if it was actually cut off, or if it came as two and can simply be clipped back on. I will let you know. My first MOT was due after I had this system, but there would be no reason why it would fail. It has a high flow cat primary therefore there shouldn't be any issues. You are more than welcome to come over and have a look at it. 1 Gringosteve reacted to this Share this post Link to post Share on other sites
adamj29 133 Report post Posted November 27, 2015 17 hours ago, Gringosteve said: Has it been physically cut and so will need welding? Have you passed an MOT with it? Hi Steve, Just spoke to Dan / Dave at Fensport. They do not remember cutting anything off, just upbolting it. This weekend I will get the exhaust out of my garage and have a look for you if you like. Thanks Share this post Link to post Share on other sites
adamj29 133 Report post Posted December 7, 2015 Update: I got the exhaust out of the garage at the weekend. It looks like the exhaust has just been unbolted. No cutting. So will just need to be fixed back together. Share this post Link to post Share on other sites
Mike_Robo 3 Report post Posted December 7, 2015 would the manifold fit to a milltek system? If you're willing to split that is :) Share this post Link to post Share on other sites
adamj29 133 Report post Posted December 8, 2015 Hi Mate, Unfortunatly I couldn't say, as the manifold has been designed to fit onto this exhaust. That's why I'm selling them as a set. :) Share this post Link to post Share on other sites
Mike_Robo 3 Report post Posted December 8, 2015 ok no worries mate Share this post Link to post Share on other sites
adamj29 133 Report post Posted January 5, 2016 Bump Share this post Link to post Share on other sites
